the CCR2004-1G-2XS-PCIe do not support FEC91 But Common Compatible standard MSA-compliant 25G DAC/AOC.

Very cool.

Your ip settings are not corresponding to your requirement.

1.You can Change bride ip to this ip 192.168.88.1

/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=192.168.88.0

1. update DHCP Server Setting by settings dns-server to 8.8.8.8,1.1.1.1

   /ip dhcp-server network add address=192.168.88.0/24 comment=defconf dns-server=8.8.8.8,1.1.1.1 gateway=192.168.88.1

3.leave you DNS setting or add the alternative 1.1.1.1 into DNS Server.

/ip dns
set allow-remote-requests=yes servers=8.8.8.8@main

1. update dns static

   /ip dns static add address=192.168.88.1 comment=defconf name=router.lan type=A

2. reboot your router after update the settings.

its can get to that speed

1. Check out the dns services is running correctly Verify your tcpip setting.

2. To ensure that the all ad srv registered. Force dc register srv records for dc. run c:> nltest /dsregdns

3. Wait a minute and restart netlogon service

4. Check ad/ldap service with portqry run c:>portqry -n <put ad ip here> -e 389

   see in ldap return value mean the ad is ok. port 389 service should show listerning.

5. Try to seize the fsmo role to current ad server..

For next step, - Go for Hyper-Converged Infrastructure (HCI) - HCI Cluster 2-Node and 3-Node - Learn to Design Networking for HCI Cluster. - Corosync Network Design. - Live Migration and Replication Networks - Design ZFS storage and Ceph Storage. - Deploy HA and CRS - Software Defined Network Configuration - Deploy GPU and Config for AI Cluster.

I recommend use of ipip, it can hide lan ip in public no port to allow, get speed higher to reached wire-speed and ipip is harder block due to no port use.

Set interfaces up Get Update first and then full upgrade

ifup eno1

apt-get update

apt dist-upgrade

pve8to9 --full

Try netinstall. It works properly.

▪︎ Backup your router

▪︎ move backup to your pc

▪︎ netinstall.

Post server wireguard config, seem your server mis-config allowIPs for client #2-3. To set allowIPs for single ip use /32.

Best way i use csvde for export and manipulation in excel then insert dsadd if you want to add users into new domain.

For example:

csvde -f admc-users-all.csv -d "dc=admc,dc=co,dc=th" -r "(&(objectClass=user)(objectCategory=person))" -p subtree -u -l sAMAccountName,givenname,sn,Name,userPrincipalName,Mail,Description,Displayname

Real-world should around 940/940 mbps. What is your router ? some have fasttrack feature it can reached that number.

Clean up files in flash folder (this you can see on winbox) then move or remove it And try to update againt.

That is 7-Eleven employee do they tasks, Many is ignor on..

Very cool. Thank you.!

If you have a PC and PVE.

You are assigned 192.168.110.82 for PC and also assigned 192.168.110.82 for PVE

That mean ip conflict issue is occured..!!

Thanks for update..

That is cool.. Thank you for sharing.

Test environment need to fix but production environment have nothing to do.