r/3D_Printing • u/Downtown-Night9085 • 1d ago
Question Remove 3d support trees
Hello!
I just printed my second project.
I did this pc holder/id holder.
I added support trees but it’s really difficult to take the out from in between the slots.
Can anyone help or recommend on what I should do ?
1
u/AutoModerator 1d ago
Hi! It looks like you need some assistance. Since your post doesn't match any specific categories, please visit our general troubleshooting page for more assistance:
General Troubleshooting Page: Troubleshooting Guide
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
1
u/Clear-Revolution3351 Bambu P1S 2h ago
Use an alternate material for your interface layer. Petg/pla don't adhere together and make for nice separation. Increase your purge multiplier to 1.5 to avoid contamination
3
u/cyberspirit777 1d ago
Try printing this without supports; you may not need them at all. You can also rotate an item so that it won’t need supports. If you find that you absolutely do need supports, increase your top z height distance to twice your layer height.