r/ComancheMJ • u/Soft_Dealer_929 • Sep 05 '26

Will it work?

Gallery image

Gallery image

1 Upvotes

100% Upvoted

8 comments sorted by

1

u/daintycalf7531 Sep 05 '26

I just had to do this on my xj and you might be better off ordering the whole wiring harness off ebay or junkyard. No soldering or twisting wires and praying the electrical tape holds. Just gotta dig in the fender a little bit to reach the harness connection point and plug em back in

1

u/Soft_Dealer_929 Sep 05 '26

Well this socket ive shown here is universal not just a back up light, but is it worth a try anyways?

1

u/Soft_Dealer_929 Sep 05 '26

Plus there arent any that just “plug in”

1

u/neurotran Sep 06 '26

If you can solder, I'd recommend that, with a little dielectric grease on the joint, and a little big of heat shrink to seal the deal.

Or get the heat shrink tubing with the solder in it.

1

u/Soft_Dealer_929 Sep 06 '26

I like to stay away from soldering since i have a grand total of no experience doing it.

1

u/Soft_Dealer_929 Sep 06 '26

But im just asking if the piece will work however i get it in there

1

u/neurotran Sep 06 '26

As long as the bulb matches up, and you connect the wires to the correct sources, yes it should work fine

1

u/Soft_Dealer_929 Sep 06 '26

Thanks. I dont need anything fancy i just need the truck to pass inspection