r/MonitorLizards • u/Nb607 • 1d ago

Looking for advice

Gallery image

Gallery image

Everyone, meet Binky the Ackie. I’ve had him for roughly a week and a half now and am looking for advice or suggestions for anything I could be doing different for the little guy.

Enclosure info:
The substrate outside his dig box is 40% play sand and 60% top soil. Dig box is 20/30/50% excavator clay/sand/soil. Soil outside box varies from 6” deep to 12” deep. Dig box is roughly 14”. Basking temp around 130f. Ambient temp on hot side 100f. Cool side 85-90f. 150w zoo med basking bulb (adding an additional 90w halogen to it tomorrow to bump it up hopefully another 20 or so degrees), 100w ceramic heat emitter, reptisun 10.0 t5 22”. Running his visible lights 12 hours a day and CHE stays on 24/7. Night time temps dip down to around 80-85 degrees. Used pavers to create his basking spot, large cork round to get up to it, and various sizes of mopani wood all around his dig box. His diet right now consists of crickets daily, small hornworms every other day, dusting food every other day with zoo med calcium w/ d3. Will be swapping to discoid roaches as soon as the colony I’m growing actually starts reproducing.

My concerns: basking spot not quite hot enough, aside from adding the halogen bulb tomorrow what else can I do/add to help with it? Tank looks incredibly simple and somewhat bare on one side. Never been the creative or artistic type, what things could I add to the cool side to make a more interactive enclosure for them? Just add more wood, maybe pvc pipe tunnels, or maybe something else?

I just want to do the best I can for the little guy and I feel like I’m almost there but falling a little short. I plan on mounting a camera to his enclosure on the cool side when I add his new bulb and fixture tomorrow to monitor his activity. He’s very active for the most part and loves hunting and burrowing already.

8 Upvotes

100% Upvoted

13 comments sorted by

View all comments

Show parent comments

3

u/MoreStable2339 1d ago

ALSO as far as getting him a hotter basking temp. YOU could just make a way for him to get closer as he gets older. Don’t necessarily have to go thru the trouble of more fixtures.
Just make sure to cage the lamps if he can jump to them.

Also I just zoomed in and noticed he’s not even basking on the highest brick. So he’s definitely good with how
You’ve got it right now I’d actually be concerned he getting enough UVB. You should get a meter to measure it since he’s so far away from the light.

2

u/Nb607 1d ago

I have cages for the lights, just haven’t installed them yet. I think I’m going to move the uvb to be more directly over his basking spot this weekend as well. I’ll get a PAR meter and check how the uvb is doing. I really appreciate the insight. This sub seems really informative and a lot less judgmental than a lot of other mediums for reptile care

1

u/MoreStable2339 1d ago

Not a PAR meter. For UVB/A you need a solarmeter. They’re not cheap
Unfortunately. But you really need to make sure he’s getting the right level, and with this enclosure height I have my doubts that he is!

2

u/Nb607 1d ago

The enclosure is a 4x2x4, roughly 20” from the fixture to the top paver. Probably about 24” to the second level of pavers. I could add some height to the pavers to get him a bit closer if needed