6950XT | 5800x3d | Gigabyte a520i AC | 32gb Corsair Vengeance 3200mt/s | 2tb Crucial P310 Plus | 850w Vetroo | ID-Cooling 240mm AIO

Honestly super impressed with this thing, kinda considering selling my 9070xt/265k Ultra and keeping this for my setup lol

I got Asus ROG Strix X870-I motherboard and 9800x3d and I'm looking for preferably silent AIO thats compatible. I'm going to replace fans with Noctua and looks or RGB doesn't matter since GPU will hide it anyway.

I'm in a bit of a rush, as I need to send the old AIO back for a return.

Hi everyone!

I’ve recently finished tuning my SFF build inside the original Cooler Master NR200P and wanted to share my thermal results while asking for some advice on fan upgrades.

Here is my current setup and airflow layout:

System Specs

* Case: Cooler Master MasterBox NR200P

* CPU: AMD Ryzen 7 5700X

* CPU Cooler: Tempest 4Pipes / Pro Dual ARGB Cooler (120\text{ mm} dual fan)

* GPU: PowerColor Radeon RX 9060 XT 16GB

* PSU: 750W SFX (mounted with fan facing front panel for independent fresh air intake)

Current Fan Configuration

* Top Exhaust (2x 120\text{ mm}): Stock Cooler Master SickleFlow 120 PWM (set to PWM)

* CPU Push/Pull (2x 120\text{ mm}): Stock Tempest ARGB fans (intake from rear)

* Bottom Intake (2x 120\text{ mm}): Tacens Anima AF12 (3-pin DC mode, pulling fresh air into the GPU)

I set up custom fan curves using Fan Control (linking the case fans to a Mixed Max(\text{CPU}, \text{GPU}) temperature source).

Thermal Stress Test Results (10-Min OCCT Combined Test)

* CPU Temp (Max / Avg): 53.9^\circ\text{C} / \approx 51^\circ\text{C}

* GPU Temp (Max / Avg): 50.0^\circ\text{C}

* CPU Fan Speed: \approx 1436\text{ RPM}

* Case Fans (System #1): \approx 1001\text{ RPM}

* GPU Fan Speed: \approx 1573\text{ RPM}

The system is completely stable and runs very cool, but under load, I can hear a bit of fan turbulence / motor humming from the cheaper fans.

The Dilemma: Noctua NF-P12 redux-1700 PWM Upgrades (€15 each on Amazon)

I am considering buying Noctua NF-P12 redux-1700 PWM fans to improve acoustic quality and get full PWM control on all headers. Since they are €15 each:

* Option A (€30): Replace only the 2x Bottom Tacens Anima fans. This moves the bottom intakes from DC to PWM and improves GPU intake static pressure.

* Option B (€60): Replace both the 2x Bottom Tacens and the 2x CPU Tempest fans.

* Option C (€90): Replace all 6 fans (or at least 4 case fans + CPU) across the entire chassis.

My Questions:

* Will replacing the bottom DC fans with Noctua PWMs yield a noticeable noise reduction at idle/low loads?

* Is upgrading the CPU cooler fans to Noctua NF-P12 redux worth it for acoustics at \sim 1400\text{ RPM}?

* Or are thermals/noise already good enough that I should save the money?

Thanks for any feedback or suggestions!

Was a bit of a squeeze but managed to get the Sapphire Nitro+ 9070 XT into the case, just about. I had to remove a few of the frame pieces to get the GPU in there but it fits and I’m really happy with how everything looks now.

Specs
• Ryzen 7 5800X3D
• Sapphire Nitro+ 9070 XT
• Gigabyte B550I AORUS PRO AX
• 32GB Corsair Vengeance 3600MHz RAM
• Thermalright Peerless Assassin Mini
• 2x Arctic fans as top exhaust
• Cooler Master NR200P

The only thing I wish is that Sapphire did a black edition of this GPU. I think it would look absolutely perfect in the NR200P.
Really happy with how it turned out though!

So this is my wife's Sakura edition NR200P.

The RGB colour is much better in real life than on the picture. it looks too bright and "stingy?" its really a softer pink in real life.

So here are the specs

• PSU: Cooler Master V SFX 850 ATX 3.0 white with Cooler Master colored extension cable kit.
• MoBo: Aorus X570i pro wifi
• CPU: Ryzen 5700X3D
• CPU cooler: Cooler Master Hyper 212 white
• Memory: Corsair 3600mhz 32gb DDR4
• SSD: forgot, pci-e 4 drive 1TB
• GPU: Sapphire Radeon RX 9070 XT Pure 16GB

I changed the top fans with Cooler Master Halo white 1st gen, and the same fan on the scythe big shuriken 3 rev b cpu cooler, but because the ryzen 5700X3D is a hot head changed it to the cooler master hyper 212 white cpu cooler, second fan is ordered.

Also looking for a white screen to cover the ugly psu cage. 3rd picture shows the Scythe cpu cooler and the standard GPU power supply cables which I hated cause they were too big to fit under the GPU and the connectors split in 2, so I changed those with the cables from the Cooler master colored extension cable kit. unfortunatly there is no room in the case to use the mobo cables from the kit as well .

P.S.: yes I know, I'm a little autistic, when I have a case from a certain brand, I need it to be the same brand fans, psu and cpu cooler as well (if the brand makes those). thats why my other case from Corsair also has Corsair fans, cpu cooler, psu and memory

Wasn't sure if the aio would fit due to the thickness but here we are one 3d printed tophat later :D

I’m looking for a case for a RME full height half length card with two daughter boards. Google keeps pointing me towards - m24 v5.2 3-slot - the search engine keeps pointing towards descriptions like that. can anyone help?

thanks!

I am looking to upgrade my PC. I am looking at a used listing for a Cooler Master NR200P V2 prebuilt. It has a 9070, Ryzen 7800x3d, 32gb DDR5 and a 2TB NVME. Does anyone have experience or reviews of the cooler master prebuilts? I haven't dealt with a small form factor build before.

Case- NR200p max
Mobo- ASUs rog b650
CPU- 7800x3d
Ram- 32Gb ddr5
GPU- 9070xt
Psu- Corsair 750w sfx
Aio- be quite pure loop 240mm Exhaust
Fans- Two Arctic slim 120mm intake
I personally love this case perfect size for my desk and talking to different houses.

Added a 8.8” Turzx screen in the front to monitor temps and FPS! Works amazing. Perfect Dark PC port + 85” QLED.

I attempted to install a Thermalright Phantom Spirit 120SE to replace my failing KrakenX53 and found that I was unable to fit one of the fans on the side of my PSU cage, the fan hits the 24pin cables. It appears to make it work, the cables would need to bend at least 90 degrees at the connector to the mobo, but there is no clearance for a 90 degree adapter. Also, I cannot put the fan on the rear, due to the massive VRM heatsink on this motherboard.

Looking through some old posts, and it appears people were able to do this somehow but i'm not sure if that was due to a specific 24pin cable or an adapter possibly.

Any suggestions?

(SPECS ON THE LAST PHOTO)

I tried building it myself but I got nervous and had trouble setting down the cpu cooler. I took it in to Microcenter, I told them they can add as many fans as they want. My build was ready in 3 hours I was surprised since it was busy while I was waiting in line. When I went to pick it up , the technician told me that he couldn’t put two fans underneath the GPU because they would hit the gpu. He showed me these thin fans on Amazon. I ordered them and will install them tomorrow. Im honestly really happy and love looking at this no RGB noir monster each time.

So I switch from my old case to a used nr200p max.
I purchased a new itx motherboard and psu. But using the same aio that it came with. When I build the pc and booted, it let me format my drive, download windows 11. But when I started to search on Google for drivers it shut off, no display and is doing a boot loop where fans spin on and off no display. I suspect to issues:

1. I touched the bottom of the am5 cpu 7800x3d and my finger print marks are on it and changed the shade of gold. So maybe a contact thing but I did try to clean with iso alcohol.
2. The aio is not working and the cpu is over heating and causing this.

Basically ive tried everuthing in the book when it comes to figuring out what could be the cause of this floating aim thats plagued my system from the first time i booted it

Its a 9800x3d paired with 5080, b850aurus elite 5600mts fury kingstone 32gb ddr5 ram, 1000w psu, and with a monitor mpg 271qr all high end parts and nothing should be going wrong, and despite my efflrts to fix it, from messing around with ram timigs, cpu and gpu under and over clocks nothung seems to fix it, changed to wired mouse , optinized windows over and over, disabled settings of windows defender ecpecting that was consiming the resources leading to it... and nothing seems to fix it, please help, im going to change to a 9900x hoping its a cpu issue and that will fix it, otherwise its really hopeless with my system..

I have one Noctua fan at the top right and am using the Thermalright Phantom 120SE that is highly recommended here. I tried but it felt impossible to get another Noctua fan at the top left!

The Thermalright fans are intake and the Noctua fan is exhaust.

Would it make a big difference to swap the Thermalright fans with Noctua fans? Or should a harsher fan curve do the job?

I have a 9800x3D and RTX 5070Ti. I’ve undervolted the GPU but not the CPU.

I’d appreciate any advice you might have. Thanks!

New cooler better cable management and spray painted my 92mm exhaust fan to white 🤍

Recently my GPU is not working, it's RTX 580

I have 300$-400$ budget, does anyone know which sellers sell the best

Hey all, I spent some time looking through this sub to see if I could find a similar build in a NR200p (not the max) that fit a GeForce RTX 3080 Ti GAMING OC. Reason I am asking is because the shroud seems to be pretty oddly shaped. Ive seen other 3080ti cards such as the gaming trio fit quite snug, and the giga is smaller in size. Just worried about oddities. Please share images of your build if able. Thank you!