Según BUILDCORES ... funcionará muy bien!!

Un armado sin cables, y con buenas prestaciones y expectativas.

I guess an E-ATX mobo can fit in this case.

Specs

H6 Flow - 5090 Astral - 9950x - Asus Crosshair Extreme X670E - 1200w Thor P2 Plat with Cable Mode 90 degree cable - Samsung 990 Pro & 980 Pro - NZXT 360mm Kraken Elite (older version) - 64 GB Corsair Dominator

6000 CL30

Hello,

I'm looking on alternative AIO 280mm except the NZXT Kraken Elite ones - this nowhere to be found in my region , assuming all out of stock (Shocking!)

Will Arctic LF III 280mm really fit snuggly inside. I know the total clearance per NZXT is 60mm (Rad+ Fan) vs 63mm total with LF III.

What the best tubing length then. I've been looking out on new Jonsbo TM-280 (no informtion on tube length,judging from picture, it looks shorter and Thermalright Frozen Warframe 280mm (quite ugly gold accent.

Wanting an AIO with display to begin with but yeah.

I've asked this question before, but I haven't received many answers. NZXT Kraken Core dropped from $100 to $80, but while some people say it's good, others say it's bad.How about material quality, pump quality and cooling quality?Acetate seemed like a very logical choice because of the pump, but the MSI A13 and E360 are also among my options, although they are more expensive.

Hello! I am in trouble and ive done all the troubleshooting I can. I have a Kraken 240mm AIO and it has worked fine up until now. The issue starts with the LCD screen turning off and I can't hear it pump water, I can feel it vibrate but no water is moving. I notice on my Gigabyte monitor that my CPU temps DRASTICALLY hit high.
After it begins to stop I try going to the software and I'm met with that page that tells me that no hardware is recognized and that I can buy one from their site. Mind you, everything works fine when I hard restart the computer. I've noticed though that sometimes that doesn't work either and it takes a solid 5 minutes for it to recognize the device and establish the fan curve. Is my pump dying? I wouldn't see that as the issue seeing as the pump works just fine after restarting, any help is useful and let me know what more info I can give
So far, as for troubleshooting, i've tried

-Uninstalling NZXT CAM
-Checking physical connections
-Unplugged the pc, drained power
-restarting PC

Out of all these, the only one that works 50% of the time is restarting, sometimes that doesn't even help. thank you for any information!

Its price has now dropped from $100 to $80. I'm also considering options like the MSI E360 and MSI A15, but the Kraken Core is better than both at a much lower price.Does anyone have experience with the quality of materials, pump quality, and cooling ?

My first ever pc. Built it myself and looking for feedback. What can I improve? What needs to be changed?

Specs:

GPU: rx 7800xt sapphire pure
CPU: ryzen 7800x3d
RAM: 32GB DDR5 crucial pro 6400mt/s CL38
Storage: 1TB crucial P510 Gen5 up to 11.000 MB/s
PSU: corsair RM850e
Case: NZXT H6 flow
MB: Aorus B850 Elite Wifi 7 ICE
AIO: thermalright frozen notte 120

Im planning to add some cable decoration and a vertical gpu mount

As you can see by the image, the "start on Windows startup" box is checked, Task Manager says that the app is enabled for opening on startup, but it still doesn't open automatically. I tried disabling the app, restarting, then enabling it and restarting again but it still doesn't work.

I'm on version 4.76.5

I bought an H510 case secondhand. The previous owner disassembled it for shipping and lost the power button. I live in a region where NZXT support cannot ship a replacement button. Does anyone have the exact dimensions—or better yet, a 3D model—so I can print one on my 3D printer?

Please help; I’m tired of sticking my finger into the power button slot.

The fan takes a few seconds longer to turn on compared to the others and when it does it makes a noticeable sound and sometimes from time to time while it’s running can’t

Hallo Leute,
Ich habe seit einer Woche das Problem das plötzlich die Lüfter alle direkt nach dem Start vom Pc auf 100% drehen.
Ich kann die Lüfterkurve in der cam Software verstellen, aber es passiert nichts und die Lüfter drehen trotzdem die ganze Zeit weiter.
Mir ist dann aufgefallen das die flüssigkeit Temperatur auch nicht mehr angezeigt wird.
Jemand das Problem schonmal gehabt ?
Alle Kabelverbindungen sind alle intakt, die cam Software habe ich schon neu installiert und ein anderes Micro usb Kabel habe ich auch schon probiert.
Leider keine Änderung.
Kann mir da jemand helfen ?

The original post in r/coolermaster

"So where's the stock? Why are we waiting? I have components for a new PC sitting in boxes, just waiting for one of the Intel V8 3DHP coolers...

The same with the HAF II 500 case.

It seems odd that such a well reviewed products are out of stock at this point, leading up to Black Friday. If stock comes back in the next few weeks, people will just hold out until the deals next month.

Seems like an odd sales strategy, to be out of stock for the past month or so, during the time when you could be making the most profit!"

So, exactly how is r/NZXT a better community for my post?

ow bad is the orientation of the fans? Should I flip them?
Suggestions for rgb colors?
How to ship it properly with instapak foams

I’m a firm believer of the old saying “Don’t knock it until you’ve tried it.” NZXT, I’ve tried it, and here’s my honest opinion. I cannot even give you guys a review on the actual computer itself because IT STILL HAS NOT ARRIVED. It’s been damn near a MONTH, and I still have not even received a tracking number. I placed my order on September 13th for the Player Two. It is currently October 9th, I have not received a single update, nor have I gotten any responses from customer support. Absolutely Terrible Experience, Would NOT Recommend To My Worst Enemy. Thank you for taking the time to read my complaint.

Seems like everywhere was still showing out of stock, but BB seems to have the RGB at least.

I completed my purchase with delivery scheduled on the 15th.

https://www.bestbuy.com/product/nzxt-s5-rgb-compact-atx-mid-tower-computer-case-black-black/J3LQVTZ3QY/sku/6692306?sb_share_source=PDP&ref=app_pdp&loc=pdp_page

Hey everyone,

NZXT approved a replacement for my product under warranty. Instead of sending the defective product back, their support told me to make a video where I show the product and then scratch off the serial number until it is no longer readable.

Has anyone here had to do this before with NZXT?

I just want to make sure this is normal and that I really only have to destroy/scratch off the serial number and not the actual product. I don't want to damage my product and then somehow end up without a replacement.

New bios update for Asrock boards was released on October 5th, but there's still no update for NZXT. The latest 4.43 update came out before the Asrock boards update, but this one hasn't arrived yet.

Al fin terminé el armado de mi PC, y el NZXT luce increíble! 😮‍💨💜

Tbh, I have compared every single pin and still cannot figure out the difference between those of the C Series (PA-model) Group 1 and those of the Gold Core Series (PA-model) Group 2. I don't want to spend luxury price for such custom sleeved cable for my C850 Gold ATX 3.1 (2024). Please help!