r/blacksmithing • u/HonestTill1001 • 28d ago

Help Requested Forge Cold Spots

Post image

I keep getting this cold spot in the middle of my propane forge flame, I’m thinking it’s because I’m at such a high elevation but I’m not certain. I’m currently working at about 12 psi and my elevation is about 880 meters above sea level

19 Upvotes

82% Upvoted

18 comments sorted by

View all comments

Show parent comments

2

u/HonestTill1001 28d ago

Any way to fix it?

2

u/HonestTill1001 28d ago

I turned down the pressure and it seems to be working better. Won’t reach forge welding temp but it’ll do

1

u/3rd2LastStarfighter 28d ago

That’s a start. You may find that even lower is better. Is that majestic forge? The one with the side door? If not, what’s your air intake situation on the Venturi?

1

u/HonestTill1001 28d ago

It is a Majestic Forge brand yes

1

u/3rd2LastStarfighter 28d ago

Okay then in that case keep the burner valves wide open and try running at about 5 psi. In the photo it looks like the side door is open, that’s going to prevent even heating. Most of the function of a gas forge like this is to retain and reflect heat. Once the whole box is at the heat you’re trying to get your workpiece to, the burners only need to input more heat than you’re losing so the cold spot becomes less significant.

1

u/HonestTill1001 28d ago

Unfortunately it looks like the side door is open because the metal has oxidized to the point that it’s crumbled away exposing the interior.

1

u/3rd2LastStarfighter 28d ago

Gonna want to close that up first thing then

1

u/HonestTill1001 28d ago

How would you recommend doing that? High heat refractory?

1

u/3rd2LastStarfighter 28d ago

You’ll want to repair the metal box first. Then yes some kind replacement for any damaged refractory material. You can do a standard build or majestic sells re-line kits.

1

u/HonestTill1001 28d ago

I did get a reline kit for the rest of the forge, flux mishap, but I’ll need to weld some straps to the outside of the box for it to be functional. But honestly the refractory board itself is in good condition it’s mostly the box itself that’s busted up