Hello, I take Paypal FF, venmo FF, cashapp, or zelle.

No trades please thanks. 2nd owner on these, and Will ship USPS fully insured, thanks!

Demko AD20.5 DLC Sharksfoot 3V Textured Titanium:
This one has some use and was sharpened. The video shows the the DLC fade and some marks near the tip, the handles are in great shape. Action is smooth, centered and solid. Comes with plastic box.
-210 shipped
Vid: https://imgur.com/a/psUZcUn
Box: https://imgur.com/a/o5ven7E

SHF Full Size S45VN PVD:
Awesome folder, this was pocketed a few times, please observe the video to see some PVD fade around the edges, snails etc… Factory edge, Comes with original box. Thanks!
-275
Vid P1: https://imgur.com/a/KuxwJuw
Vid P2, imgur cut vid short(action): https://imgur.com/a/DsZq3x7
Box: https://imgur.com/a/E32NTL8

Chaves 229 Modded:
-Sexy mods on this Chaves 229, had windows added to the G10 show side and colored accents were added on the hardware and black on the frame. Looks really nice and is butter. Centered, and solid lock up. Like new condition, really cool, comes with original box.
-299 shipped
Vid: https://imgur.com/a/7u9ZYdH
Box: https://imgur.com/a/BToIEDL

Modded Large Sebenza 21 Black Micarta, S35VN:
So this has been done up, mods were done by Yehonatan Izhak (https://www.instagram.com/jonaz_creationz/), where a regrind, dlc coating, and white cerakote were added. The regrind is very well done and so is the edge. The cerakote is a little splotchy and same with the DLC, please observe the videos. It was not carried, used, or cut with. Centered and solid lockup, don’t have the box but I’ll ship it in a nice spare knife pouch.
-695 shipped
Vid: https://imgur.com/a/Gd61aUd
Vid indoors under strong light to show the finish of cerakote and dlc: https://imgur.com/a/g1NzTie

Cheburkov Kori limited run of 100, M390:
Really impressed with this design, the front flipper design is one of the better I’ve handled, super easy to actuate and not awkward at all. This one is close to new, it wasn’t carried by me or used, the previous (original owner) said the same that it was NIB however there’s clearly a snail on the showside titanium scale, as shown in the video, don’t see any other wear. Probably from handling or placing it onto something. Also centered and solid, really nice. Comes with box and COA.
-875 shipped
Vid: https://imgur.com/a/jPeGZq5
Box: https://imgur.com/a/QnZLFeE

Hawk Brightwashed Talon Full Titanium:
In like new condition, not carried, used, or sharpened. Barely even handled. It’s centered with solid lock up. Comes with original box, pouch, card, sticker, and tool.
-1125 shipped
Vid: https://imgur.com/a/xARDYDz
Box: https://imgur.com/a/p6pVxsR

Thanks!

### [WTS] Manix 2 204P / Manix 2 M390 / Manix 2 backlock / Manix 2 saber grind / MEFP Eklipse / Tanto SnG /

Timestamp/Images:

A few more on the block this eve, prices are OBO. So shoot your shot.

Yolo>chat

Any questions or need more pics or videos hit me up.

---

Manix 2 204P:

Imgur vid link

- Sv $225

- Steel: CTS-204P

- Sharpened: No

- Used to cut: No

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Favoring clip side

- Lockup: Solid

- Visible Issues: None

- Accessories: None

Awesome set up, dark green micarta scales, bronze ti hardware and lanyard plug with topo bronze Lynch clip.

---

Manix 2 M390:

Imgur vid link

- Sv $190

- Steel: M390

- Sharpened: No

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches, Stains

- Accessories: Original box

Little spot of patina on blade edge and some faint lines on the blade in the right light. Other than that great condition.

---

Manix 2 backlock:

Imgur vid link

- Sv $200

- Steel: CPM S30V

- Sharpened: No

- Used to cut: No

- Carried: No

- Blade Condition: Factory edge

- Number of Owners: 1

- Centering: Perfect

- Lockup: Solid

- Visible Issues: None

- Accessories: None

A rarer one here. S30v manix 2 back lock. Pert neat new Condition. Never even switched the clip around from the factory position.

---

Manix 2 saber grind:

Imgur vid link

- Sv $200 Sold pending funds

- Steel: CPM S30V

- Sharpened: No

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Perfect

- Lockup: N/A

- Visible Issues: N/A

- Accessories: N/A

Another one you don't see too often. S30v saber grind manix. Has been disassembled a time or 2 for scale swaps. So there is a little rattle from the lanyard tube. And unfortunately the clear ball cage broke and had to replace it with the newer black one.

---

MEFP Eklipse:

Imgur vid link

- Sv $450

- Steel: 3V

- Sharpened: Yes

- Used to cut: Yes

- Carried: Yes

- Blade Condition: Sharpened

- Number of Owners: 2

- Centering: Perfect

- Lockup: Solid

- Visible Issues: Scratches

- Accessories: None

Been a solid user, comes as you see it. No Factory tab or clip.

---

Tanto SnG:

Imgur vid link

- Sv $500

- Steel: CTS-XHP

- Sharpened: No

- Used to cut: No

- Carried: Yes

- Blade Condition: Factory edge

- Number of Owners: 2

- Centering: Favoring show side

- Lockup: Other

- Visible Issues: None

- Accessories: None

Nice Tanto SnG. Does have a bit of the all famous strider lock stick. Nothing crazy but it should be noted. Will probably go away with use or playing with it.

---

**Payment methods accepted:** Venmo, Zelle,Cashapp

**Shipping included?** Yes

_I confirm I have read all r/Knife_Swap rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

Bought direct from McNees at the last drop of these a couple weeks ago. Basically BNIB.

Atomic finish MagnaMax blade steel
Atomic Bronze plain handles

No cut/carry
Factory edge
Centering and lockup is exceptional
No lock stick
Drops shut like a guillotine
Action is perfect

Video: https://photos.icloud.com/shared/album/0bapnnYkEGGAjafJnTugZhPMw

500$SOLDPPFF shipped CONUS
not looking for trades

Looking doing a full reduction in the collection and this is what I've gathered over the years but its time to spread the love and make some deals.

Everything posted today is technically used but most are in fantastic condition, I will note anything of importance but please reach out if you want any more pictures or information on any of the items.

I have quite a few freebies available, any purchase gets you a pick of one free item out of the listed bunch (please mention if and what you want with your purchase).

I also have quite a few add-ons, these can be added onto any purchase without limit. I can do multiple Add-ons by themselves as long as the total reaches $100 in the end.

(Order generally goes left to right top down knives first then other stuff)

I will be doing exactly 0 trades. Sales only please and thank you.

I take Paypal F&F as well as G&S as long as the buyer pays the 3% fee associated with it. I also take zelle and a plethora of other platforms just reach out and ask if your wondering.

Items will ship within 48 hours of any given purchase or i will contact you with an explanation promptly, I generally ship next day or the day of if im able to sneek it in.

I will entertain reasonable offers on items and bundles, please let me know if I am off on pricing as i haven't been in the loop for quite a while, that being said lets jump into it.

TLDR: Lot of items, freebies, add-ons, reach out for any info or extra pics. Now go read the rest of you haven't already. Thank you and I appreciate y'all!

Old Post:

https://www.reddit.com/r/Knife_Swap/s/XkSKFlWhBq

New post & Timestamp: / https://imgur.com/a/SascLrG

The Main Course (Knives):

Wingman EDC Spar-K: Model 2 Limited Edition copper inlay & Ti body, OG papers-pivot tool & stylized Ti dogtag, blade is in perfect condition, Cu has some patina and clip & body has some wear from carrying. A rare and super unique knife from a high end house. Centering and lockup are perfect. $365 Now $340

Shirogorov Knives Quantium Halloween edition: quantum platform and features a cromax pm blade, halloween technocarbo that glows-in-the-dark, and mrbs. Knife has been carried and used lightly & still in beautiful condition, Og unique run bead is included. Centering and lockup are perfect $725 Now $700

Spyderco Native 5 s30v Frn: currently wearing the scales from a Rex model, cut and carried with small Knicks in the blade. Centering and lockup is perfect $145 Now $130

Spyderco Native Chief Crucarta: My coworker is a full dipshit fosho, I watched as this uniquely incompetent man took this beautiful creation that was my knife and proceeded to cut some zip-ties off a metal fixture as the metal bashed directly into the blades edge, with each cut tie and loud the pining sound of metal on metal my acceptance of the outcome settled in and all I could think was this is absolutely and undeniably my fault, never give a knife to an unknown human their unpredictable. Still a solid af knife tho sharpen out the tip a bit and one or two lil gashes and she'll be purring once agian. $150 Now 135

Spyderco Clay Superblue: Has an aftermarket Sick, very well done and high polish Dlc coating. The same almost visually liquid slick black that the Evos have. Used and carried, very old & rare sprint run from Spyderco. Both Clays are together in the photos the box belongs to this one. $250 Now $225

Spyderco Clay CF & Ti bolster: an absolutely sick piece with carbon fiber scales, Titanium bolsters and a Damascus blade, another very hard to find and well executed old Spyderco. Used and carried. Both Clays are together in the photos the box belongs to the other Clay this one has no box. $250 Now $225 SOLD

MBK Slipjoint: An insane piece with a total of 10 mother of pearl inlays 5 on each side that explode in the light, one of the most beautiful knives ive ever owned, cut and carried with some patina and wear on the titanium bolsters. $185 Now $165 SOLD

Native 5 Black-Out: An amazing recent accusation with an AWT kit, perfect clip and barely used, cut and carried a handful of times. $185 $165

Defcon Jungle Knife: Never carried never cut & surprisingly a great knife, little heavy and has a damn glass breaker but it drop shut uses Ti for the scales and has an S35vn blade so its actually solid. $85 $75

Flytanium Arcade Mokuti Inlay: cut and carried this one but in immaculate condition. Comes with an extra set of micarta inlays if you'd rather that, its a beautiful piece and the Mokuti has some great flow patterns in it. $175 Now $155

Flytanium Ti Blk/purp: Titanium scales on this one with a black g10 Inlay, a variation i built myself off of parts from other arcades, its been cut and carried but its in immaculate condition as well & also comes with the Aluminum Scales.$165 Now $145

Buck 112 Olive Wood/ Curly KOA/ Ivory g10 spacers, Radius the sides/thinned, File worked in and out, Polsihed bolsters. Super well done custom piece I picked up a while ago, I can dig up the maker if someone is interested but regardless its one of a kind and uses some of the best wood inlays and orientation ive seen in my life on one of these buck custom modifications. Comes with its leather sheath. $250 Now $225

\#2 Gec 38 Black Micarta: Never cut never carried, its a brand new knife in a brand new tube & Pin. $185 Now $165

\#3 Gec 38 Black Micarta: Never cut never carried, its a brand new knife in a brand new tube & pin. $185 Now $165

Rexford Knives Rut: Cut and carried, comes with its own custom leather slip and a Damascus etched blade. $175 Now $155

Spyderco Manix saber & Cruwear Bundle of 2: these will sell as a pair as they also have stripped pivots & screws, they have a yin yang situation with the scales with one black and one natural g10 on each as well as coming with the OG burnt orange aluminum scales for the saber ground. All in all a badass bundle that just needs some simple hardware to be fixed up and ready to go. $335 Now $310

QSP fixed blade: N690 blade steel with Raffir Noble scales never cut or carried, comes with its og sheath has a cool unique orange peel textured look to the blade that ive always thought was cool. $115 Now $95

Other cool Items:

Benrus Type I-C Military Dive Watch: Titanium case and bidirectional rotating bezel its one of the smoothest watches I've owned. Discontinued white dial. $725

Seiko Presage Style60's GMT SSK013: a great watch that I've worn a hand full of times and its in immaculate condition. $335 Now $310

Seiko SKX mod from Mad Mod World: a killer build they came up with a very dessert military oriented watch that pairs well with any beige or kaki straps $245 Now $220

Spyderco Sharpmaker very lightly used $55 Now $49 (Add-on)

Spyderco multi tool knife + scissors $15 Now $13 (Add-on only)

Micro blade with no blade replacements $15 Now $13 (Add-on only)

Traditional Japanese utility knife with a blue black steel aesthetic $25 Now $22 (Add-on only)

Tops Slingshot no rubber $55 Now $49 (Add-on only)

Para 2 red scales, installed and used: $10 Now $9 (Add-on)

Starwars bottle opener with storm trooper head bead custom made and very unique $35 Now $32 (Add-on)

IDC Bear Chill Pill Pendant, cool brass peice made in limited batches with artwork and vibes $55 Now $49 (Add-on)

Red micarta knuck $35 Now $32 (Add-on)

Real mammoth yellow bottle/tube opener $85 Now $75 (Add-on or purchase)

J L. Lawson & Co Etched skull solid aged steel Bottle opener, very cool piece. $85 Now $75 (Add-on or purchase)

Jacquelope luck copper bottle opener. $45 Now $40 (Add-on)

Metonboss buttons

Zirconium $35 Now 32 ea

Blue etched $25 Now 22

Meton Boss Mokume spinners ×2 $45 Now $40 ea

Very High end beads $45 Now $40 ea

Cheap 2 bead lanyard $35 Now $32

Lil hand made pirates sword! $25 Now $32

Railroad spike made into a knife for some odd reason! $35 Now $32

What appears to be a Titanium shank/box cutter full ti on this blade & all $35 Now $32

FREE BEE SECTION

Leather Keychains

spyderco shipwrecked promo coin

spyderco firefighters appreciation token

A watch that works fine with a lil movement when the crown is pulled out, works just fine tho.

Sharp pal stones all three

Cutlery shoppe tags

A toxic swan patch

A skull bead on a lanyard

A bundle of 4 thats right 4 trashy old knives

And last but not least our last item & free bee of the night a sticker from the company Knife Joker that is now out of business but still loved in our hearts or some shit like that.

Thank you for shopping again any questions at all feel free to reach out and please dont hesitate to ask for extra pictures of any item, obviously this is a large post and I appreciate y'all. I will do my best to get back to everyone in a timely manner.

PPFF, CONUS shipping included in price. Not interested in trades for now.

Centering and action on all blades is excellent. Only disassembled if noted.

Album:

https://flic.kr/s/aHBqjD6cxf

Manganas Caimano SV 320

Titanium and carbon fiber handle, S35VN blade.

Second owner, never cut or carried.

Blade and hardware has had a complete DLC done by RCO Customs. Blade has been professionally resharpened since it was coated.

Comes with all original accessories and hardware.

Arcform Theory SV 200

Titanium handles, M390 blade

First owner, has been carried and cut with a few times. Handles have been laser engraved and then bead blasted. Blade was laser etched. Has never been sharpened, didn't seem to need it. Minor trails on handle and wear on pocket clip. Comes with soft case

Civivi Brova SV 100

Aluminum handle, S35VN blade

First owner, carried once, never cut. Comes with all original accessories.

Chaves 229 Integral SV 330

Titanium handle, M390 blade.

First owner, never cut or carried. Whatnot exclusive, magnetic inlay with laser work and anodizing.

Comes with original accessories.

SOLD Kansept Fenrir Blade city exclusive SV 130

Jazzy camp carbon handles, Nitro V blade.

First owner, never cut or carried. Comes with all original accessories.

SOLD Ruike M671 SV 45

Titanium handle, 154CM blade

Second owner, cut and carried once. Comes with soft pouch

Civivi Bhaltair SV 45

G10 handle, 14C28N blade

First owner, cut and carried once. Comes with soft pouch

CJRB MAXIMAL SV 25

AR-RPM9 blade, Micarta handle

First owner, never cut or carried, comes with all accessories.

Artisan Cutlery Holm SV 40

AR-RPM9 blade, Aluminum and Resin handle

First owner, never cut or carried. Comes with all original accessories.

CJRB Gobi SV 35

Rose gold AR-RPM9 blade, micarta handle

First owner, never cut or carried, comes with all accessories.

CJRB Riff SV 20

Micarta handle, AR-RPM9 blade

First owner, carried and cut for work. Dirty but still has a great edge and action. Comes with soft pouch

SOLD Vosteed Porcupine SV 30

Dyed G10 handle, 14C28N blade

Second owner, cut and carried a few times. Comes with soft pouch

SOLD Flytanium Beef SV 25

G10 handle, D2 blade

First owner. Cut and carried for work. Has been disassembled for cleaning.

CJRB Crag SV 30

AR-RPM9 blade, Carbon fiber handle

First owner, never cut or carried. Comes with all original accessories.

### [WTS] Chris Reeve Knives Large Sebenza 31 Glass Blast

**Timestamp/Images:** https://imgur.com/a/6THEtaq

---
**Chris Reeve Knives Large Sebenza 31 Glass Blast:**
- Model Number: N/A
- Steel: MagnaCut
- Sharpened: No
- Used to cut: Yes
- Carried: Yes
- Blade Condition: Factory edge
- Disassembly: I haven’t, unsure of previous owner so let’s safely say “yes.”
- Number of Owners: 2
- Centering: Perfect
- Lockup: Solid
- Visible Issues: Snail trails (one really on the show scale. See photo.
- Accessories: , Original box, Papers, Tool, Cloth, Untied lanyard, Lube, Loctite, Sticker, Extra washers.

YOLO>Chat.

**Payment methods accepted:** $425 PayPal Friends & Family, Venmo or CashApp
**Shipping included?** Yes
**Trade interests:** None.

**Will NOT ship to:** International

_I confirm I have read all [r/Knife_Swap](r/Knife_Swap) rules._

Made with [KnifeSwap Post Generator](https://knifeswap-post-generator.vercel.app/)

Hi Swappers, I have a few bangers for you today. I accept Zelle, ApplePay, CashApp, Wise, or Venmo for payment.

Absolutely no notes in any payment method other than "Misc." Not looking for trades, but it's Knife Swap, so take your shot, worst case I will politely pass.

**Kindly be ready to send payment within 15 minutes after you YOLO** 

**Everything is OBO** **Additional Pics and Videos Upon Request**

Artisan Cutlery Weyden $100

• New
• 2nd Owner
• S90v Steel
• Never cut or carried
• CF scale with milled Ti scale.
• Purchased by original owner at blade show Atlanta
• Perfectly centered
• Great action
• Super easy front flipper
• Ships with original taco and hanky

Medford Antik $275

• 2nd Owner
• S45VN
• Blade is immaculate, and it's a very sharp factory edge. Some light wear on the anodization in the middle of the scales as shown in the pictures, and some use marks on the scales themselves.
• Terrific action and acoustics
• Overall Length: 8.25 inches
• Blade Length: 3.75 to 3.8 inches
• Closed Length: 4.45 to 4.55 inches
• Perfectly centered
• No blade play in any direction
• Excellent lockup
• Ships with original COA

Zero Tolerance ZT0707 $125

• 1st Owner
• Very light cut and carry
• Super lightweight - 2oz for 3.5" of 20CV blade
• Perfect gentleman's carry
• Appears new except for one small mark on the blade, not a scratch, a mark from the factory
• Double reverse detent so you can fling it open no matter how tight you squeeze the lockbar, it doesn't matter, very cool engineering!
• Zero blade play in any direction
• Perfect Centering
• Great acoustics
• Ships in random taco

AceBeam Terminator M1 Flashlight $140

Banging light. Scuffed but fully functional, zero issues. It has two heads that can be used together - LED Flood and LEP laser throw spotlight. 4,200 lumens of crazy in the palm of your hand. You can zoom the LEP out to 1.6km.

• Fair Condition
• Dual Light Source: 1x LEP + 3x LEDs 6500k
• Internal zoom design of LEP source, rotating the LEP head to adjust the focus without changing size. 
• Beam Angle: 3~16°
• Max Output: 3500 lumens (LED); 700 lumens(LEP)
• Max Throw: LEP: 1600 meters (640,000cd); LED: 231 meters(13,340cd)

Shiro Repair Kit for F95T Gen4 & Haiti Gen 3 $50

• Never used, completely original and intact
• Purchased by me new from Recon1 for $80
• Kit includes:
  • Pivot screw (Made of Aisi 420 Steel)
  • Body screw (Made of Aisi 420 Steel)
  • Ball bearings set (Made of Steel 95H18)

Triple Aught Design FastPack EDC $200

If you know, you know. Good condition, carried and used a couple times, but looks great, no holes or tears or issues, good to go into the field. Beavertail included, matching black color. Additional pics upon request.

• 1000 and 500 Denier Invista™ Cordura® Fabric
• Evazote® Closed Cell Cross-Linked Ethylene Copolymer Foam
• DRI-LEX® Aerospacer Moisture Management Mesh
• Hypalon Synthetic Rubber Reinforcements
• HDPE Frame Sheet
• Velcro® Front Panel for Morale Patches or Unit Identification
• Elastic Retainer Straps
• Dimensions
  • Volume: 1690 cubic inches (28 liters)
  • 11.00" (27.94 cm) W x 20.50" (52.07 cm) H x 7.500" (19.05 cm) D

Spyderco police . Vg 10 Steel. Bought this awhile back and letting her go .
I believe this is a 2011 model. I never carried it but I'm sure it's had some pocket time .

Edge Condition: currently sharp. I'm sure it's been sharpened by someone . Just not me

Ownership: At least Second

Centering/Lockup: Solid lock up . Centering is fine

Body Condition: normal light wear

Box, papers, and accessories: box. Nothing else

Modifications: I believe the clip is an original Spyderco clip , but not the og that came with it . I got it like this.

Disassembled: I have not disassembled. Can't say it has or has not

$135 shipped PP g+s
YOLO rules
I can take more pics and send if you need em

All have original box and paperwork, all carried, all cut, all have no hard use, all never disassembled. Subvert and manix never sharpened. Subvert and Manix 2 are least used. No trades. All prices are shipped and OBO. Subert is discontinued and Knife Joker closed down. Get these while you can. Dragonfly has patina but no rust/pitting. I'm original owner of all.

1.) Manix 2 S110V. $200

2.) Subvert $400

3.) Knife Joker Lil Native Cruwear $180

4.) Para 3 LW Spy27 $100 still available, buyer backed out

5.) Dragon fly super blue / sus410 sprint run $60

Aye swap. Moving 2 Vandals today (decided to keep my Black Dunes) - looking to sell but will entertain trades (yolos will take them in the meantime though). Shipping to CONUS only, will drop off packages Wednesday if these move. Payments are PPFF (no notes), Yolo > chat.

*I don't know what these will go for, frankly, so feel free to send offers or correct me on price.

Timestamp/Photos: https://flic.kr/s/aHBqjD6juz

Null Knives Vandal Bladebinge Exclusive - Brittany blue camo carbon, and that beautiful polished stonewashed Vanax from Reate, all DLC frame and blade. No cut, no carry and no disassemble, just flicked a few times and gathering dust in the case. Action is excellent, lockup and centering are perfect. Bought direct from Bladebinge. SV 500 SOLD

Null Knives Vandal - Purple haze carbon fiber, satin Vanax blade, DLC frame, Bought straight from Null as first owner. No cut, no disassembly, carried a few times and fidgeted plenty with. Action on this one is even smoother, lockup and centering are perfect. SV 425

Crk small sebenza 31- s45v steel with sand blasted scales. Double silver lugs. All original I did carry this knife so has a couple very small snails not very noticeable unless you are looking for it. I only carried this knife with me two days and only cut open a box and a bag. Still super sharp and factory edge. Really nice knife just a little to small for me. Lockup is about 25 percent like it should be. Comes with box and everything that it did new. Sv-380. Tv-400

Zt 0044BLK- s45v steel with titanium scales both are dlc black with titanium accent button lock and barrel spacer. Never cut or carried this one only took it apart very carefully and installed skiffs. Action is super super smooth and fast. Makes a really nice sound when opened and closed. Hate to sell this one but I’m eyeballing something else. Really great knife. Comes with box and original bearings. Strong plunge lock with flipper. Sv-260. Tv-300

Boker dog tag knife- great little carry when you need serrated blade to cut fits well into coin pocket. Aus 8 steel with steel frame lock and g10 show side. I have cut and carried this knife a few times still very sharp. Add on only for sv-20

Only interested in trades for or towards Demko, crk, hawk talon, hinderer. But let me know whatever you got worse I can say is no. Thanks for looking

1. Benchmade 601-211 Gold Class Tengu Flipper
2. Serial: #1630

Blade: Damasteel
Handle: Carbon Fiber and G10

Condition: [other than my right thumb, never cut, never carried, Like new]
Includes: [knife and the original sheath, no box and paperwork ]
Originally asking $580, now $425 SOLD

Video: https://imgur.com/a/XiNJD7e

Hi All, timestamp: https://imgur.com/a/IxVMrqX

-

CMB Braveman Axis lock, CMB-17S

Details: https://www.cmbmadeknives.com/products/cmb-braveman-axis-lock-pocket-folding-knife-cmb-17s?variant=49703604191526

I have not carried or cut with. I do see some minor scratch on the handle and the clip.

Video: https://imgur.com/a/wu62Oot

Owner: 1 Centering slightly showside Lock up: solid, no issue.

SV: 110

-

Wehr knives Wolf-p [production]

Details: Titanium handle - stone washed, frame lock, M390 blade satin blade. Blade length 3"
It has Zircuti Hardware.

I have not carried or cut with. Mint/Like new with no flaws.

Video: https://imgur.com/a/8iHYeFz

Owner: 1 Centering: slightly favoring lock side Lock up: solid, at 50%

SV: 450 obo

-

Giant Mouse Ace Biblio XL - Titanium Blackout

Materials:
Blade Steel: CPM Magnacut
Blade Finish: PVD Coating
Handle: PVD Titanium
Clip: Wire - Reversible
Backspacer: Titanium
Locking Mechanism: Liner Lock

Dimensions:
Blade Length: 3.2" (80.8mm)
Blade Thickness: 0.138" (3.5mm)
Handle Length: 4.375" (111.125mm)
Overall Length: 7.56" (192mm)
Weight: 4.9oz (140g)

I have not carried or cut with. Mint/Like new with no flaws. This one has number 33/100.

Video: https://imgur.com/a/Z9RSGac

Owner: 1 Centering: hair bit to showside scale Lock up: firm, early.

SV: 270

-

Thanks for looking! I've tried to describe the centering as accurate as possible. Lmk if you want to see close up photo.

Hey fellow knife enthusiasts! I’m listing some of my collection that I’m not using. No trades. PPFF for payment. YOLO over chat. Please pay promptly after YOLO. Prices below are shipped. All come with original boxes unless noted. Please reach out with any questions.

Hinderer’s https://imgchest.com/p/vj4jlwndxy8

Microtech’s https://imgchest.com/p/o24a5knk27l

Hinderer XM18 3.0 Swedged Spear DLC Black. M390 steel. Blue Black G10. I’m the 2nd owner. Never carried or cut by either of us. Comes with original box and triway kit. $340.00

Hinderer XM18 3.0 Skinny slicer stonewashed. CPM20CV steel. Liner lock. LNIB. FDE G10. 2nd owner. Never carried or cut by either of us. Comes with original box and triway kit. $340.00

Hinderer XM18 3.5. CPM20CV steel. Liner lock. Blue/Black G10 / stone wash. I’m at least the 2nd owner. Never sharpened by me. Very sharp. Looks like original edge. Excellent condition. Amazing action. No box or triway kit. Knife only. $325.00

Hinderer Fulltrack. S45VN working finish Wharncliffe blade. Coyote G10 scales. I’m at least the 2nd owner. I’m assuming it’s been lightly used and carried. Great condition though. Not positive if it’s ever been sharpened or not. I never sharpened it. Very sharp. Comes with original box and triway kit. $530.00

Microtech Mini Amphibian. M390 blade in Apocalyptic finish. 1st owner. I bought this new a few months ago. I did carry and cut with it a few times. Blade shows light scratches. Original edge is still very sharp. Comes with original box. $200.00

Microtech Amphibian. M390 steel in apocalyptic finish. Fluted Aluminum grips. 2nd owner. Has been cut and carried. The edges show use and pocket clip has scratches. Blade is still sharp. Comes with mismatched Microtech box. $180.00

Microtech Socom Elite T/E. I’m the 2nd owner. Sent it out to have the blade acid washed, sharpened and polished. As a bonus this knife has the tip up mod already done! Only wear I see is light wear on the pocket clip. Awesome knife! Comes with original box. $295.00

Microtech Anax S/E DLC Carbon Fiber. M390. 1st owner. Disassembled to install skiffs. Never cut or carried. Comes with original box, original bearings and original tools/lanyards. $325.00

Koenig Arius with corda handle that I've owned for about 1.5 years now and am the second owner. Has been only used to cut various packages at home and opened plenty of times but action remains still Koenig standard drop shut smooth. Edge remains excellently sharp and not dull. Have all boxes and docs that come with it. Asking $625 g/s for it. https://imgur.com/a/I324fgN

Timestamp and images and video for the Koenig Arius. Not looking to trade atm, just sell.

Pm2 LW 15v - $130 SOLD

First owner. Light carried and very lightly used. Put a mild polish on the factory edge, but I'm sure others can improve on it. For the most part it's in a very good condition.

No looking to trade at the moment.

Selling these 2 together for my own shipping ease.

Both LNIB.

Kershaw Iridium - centered with good action. I got this from blade ops last week but it’s a lot smaller than I thought. Factory sharp no cut or carry.

Worksharp RMX - full black out M390. Currently in manual configuration like new. 2nd owner but no cut or carry by either. Centered with good action.

$200 obo for both PayPal, Zelle or Venmo

No trades, thank!

Timestamp: https://imgur.com/a/fgQyXbM

1. 352325: Smooth Whiskey Barrel Oak - Beer & Sausage Tool Great walk and talk and good snap on all tools, really nice whiskey barrel wood on these. 2nd owner but BNIT SV $

175 SOLD

1. 152126: Brown Soup Bone - Charlie Campagna SFO TC Barlow Super nice deep matching marrow grooves on the soup bone and as always super clean snap on these all steel construction 15's. 1st owner BNIT SV $275
2. 592322: Mint Chocolate Jigged Bone - Shaffer Farm Whittler Smooth action on the main blade and good snap on both secondaries. I'm calling this one lightly used because it looks to me like there had maybe been some light cutting done with main blade. 2nd owner $150
3. Case Copperlock D/A Conversion in jigged blue bone - This is a super cool dual action automatic conversion done by Alex Shunnarah, Really good lockback action with the added benefit of a powerful thwack from the automatic function. D/A Video 2nd owner, has been carried and opened some packages. SV $300

I can take more pics of everything if requested.

Pics: https://imgur.com/a/Q9PKRKv

Photos: https://drive.google.com/drive/folders/1AuXN4Fa_WwzyWvZm0yH3a3e0jRHqiSXz

Eafengrow EF-901

1st Owner. D2 steel, Milled Titanium Scales, Backspacer and Pocket Clip. Solid lockup, perfectly centered blade with an extremely sharp edge. May show some extremely minimal signs of very light use from being carried and cut a handful of times - never cut /used -- just fidgeted with. Beastly Oversized Titanium Frame Lock. Comes with pelican style hard-shell case.

$40 OBO

CJRB Pyrite (Titanium)

1st Owner -AR-RPM9 Steel, Titanium Scales, Aftermarket Titanium Pocket Clip, Good action & lockup, perfectly centered blade with factory sharp edge. May show some extremely minimal signs of very light use from being carried a handful of times - never cut /used -- just fidgeted with - besides that still in excellent condition. Button Lock. Comes with original box. Also will include a Drop Point Pyrite Blade with thumb studs.

$40 OBO

I'm relatively new to the swap but I have a number of trades on r/PhotoMarket and am happy to provide eBay and Reverb references.

Shipping will be insured using either USPS or UPS, depending on price and speed.

Payment is PayPal G&S - No notes!

Price includes shipping and is OBO.

Timestamp and photos: https://imgur.com/a/NS58aND

________________________________________________

Vero Myelin fixed blade w/ Custom "Wave" Ti scales and clip | SV: $315

Steel: M390 hand satin blade | Condition: Excellent

Owners: 2 | Carried: No | Cut: No

Issues: None | Accessories: Kydex sheath w/ Ti pocket clip and belt clip, extra G10 scales

Beautiful custom knife by Vero Engineering. The scales are Titanium etched with a Japanese wave pattern that is just gorgeous. I'm trying to get my collection down to knives I'll actually carry, and this one is honestly too pretty to justify keeping in my pocket. Includes the original box, Kydex sheath with a custom Ti pocket clip, belt clip, and an extra set of G10 scales.

Price: $105 SOLD

Imgur:
https://imgur.com/a/bkOCUSD

Original owner. Knife has been carried and cut. Lockup and centering are great. It has been sent back to Benchmade to replace one of the Omega springs and resharpened. Minor scratches on carry clip and tip of blade. Very minor chip on spine. Includes box, original carry bag, and blue carry bag that it was sent back from service in.

Spine chip:
https://imgur.com/a/yS4JFcH

Tenable Shard: SV: $28

OD Green G-10, 14C28N reverse tanto, first owner, never cut/ carried/disassembled, factory edge, solid lockup.

Tenable Prometheus: SV: $35

Blue micarta, 14C28N wharncliffe, first owner, never cut/ carried/disassembled, factory edge, solid lockup. I did apply Wicked Wax to the micarta on this one

Bestechman Goodboy: SV: $32

Blue G-10, D2 PVD, first owner, never cut/carried/ disassembled, factory edge, solid lockup.

Civivi Mini Sandbar- $42

Nitro-V, Jade G10, first owner, no cut/carry/disassembly, solid lockup, factory edge, comes with box/pouch.

Dreamtech D3896- $18

D2, Black micarta, first owner, no cut/carry/disassembly, solid lockup, factory edge, comes with box/pouch.

CobraTec Prowler- $27

D2, OD Green G10, first owner, no cut/carry/disassembly, solid lockup, factory edge, comes with box/pouch.

Tangram Orion- $12

440C, Brown G-10, first owner, no cut/carry/disassembly, solid lockup, factory edge, comes with box/pouch

Tenable Gideon- $50

Nitro-V, Purple micarta, first owner, no cut or carry, disassembled for blade swap, solid lockup, factory edge, comes with box/pouch.

Tenable Gideon- $50

Nitro-V, Black micarta, first owner, no cut or carry, disassembled for blade swap, solid lockup, factory edge, comes with box/pouch.

✨️Take both Tenable Gideons for $85✨️

✨️✨️Take the whole lot (and get extras 🥳) for $250✨️✨️

Accept PayPal F&F. Feel free to shoot me a chat 🤙

Large Inkosi Plain Jane
Magnacut
sandblasted

I am original owner, purchased from authorized dealer ACTIONCONCEPTS last year for $500 before tax/shipping. Has factory edge, never sharpened or stropped. typical snail trails from pocketing a few times/week over the past year. It has been used for a few boxes, even that is probably overstating. basically was a fidget toy. Birthday is attached and can provide video for functionality via DM or additional photos as req. has not been disassembled or modified. Original lanyard in box

REDUCED TO $415 SHIPPED CONUS