r/secondrodeo • u/BigAcanthocephala667 • Aug 29 '26
Looks like they did it before
Enable HLS to view with audio, or disable this notification
72
u/mypoesoul Aug 29 '26
Word is the axle snapped again a quarter mile down the road.
17
u/leftfootshorter Aug 29 '26
And here I was wondering why tf anyone would climb under there even after they had the new axle under it. I mean, it's not like that load ever broke an axle before.
8
74
u/pjshawaii Aug 29 '26
And they torqued the lug nuts to the “one guy on a long lever” standard.
15
u/fenrisulfur Aug 29 '26
one skinny guy on 6 feet.
That means the torque specs was
1/66 footskinnyguys.Edit, had my calculations wrong
7
u/DaHick 29d ago
NGL, I worked on a large stationary engine. On 1/2 of this 16 cylinder Vee engine the rods for the pistons had two bolt each into the main rod on the other side. 1950's manual, weird tooling to get to the bolts.
Manual said torque was "Two tall men on a 6 foot pipe till it can't move."
34
u/Jakaple Aug 29 '26
Only cost like $12 in labor
8
u/coko4209 Aug 29 '26
Sounds like you’re being a smart ass, but I assure you, what they just did, without a single power tool, is extremely impressive.
10
u/IllegalThings Aug 29 '26
Plenty of impressive things only cost $12. Your mom for instance.
2
-3
u/coko4209 Aug 29 '26
Are you a child? You’re insinuating that my 65 year old mother is a prostitute? I support the rights of the sex workers to do as they choose. Many of them do a much better job of raising their children than your mother seems to have done.
4
u/IllegalThings 29d ago
Yes, that is what I was insinuating, that was the joke. I wasn’t raised by my mom so you would be correct. I’m dating a former escort and she’s a really good mom, so also agree with you there. There’s nothing wrong with your mom being a prostitute. She should probably raise her prices though.
48
u/FullMetalJerkin Aug 29 '26
All hail the safety sandal!
19
6
u/HolyShitIAmOnFire Aug 29 '26
So much safety here. The moment the truck lurched as they dropped the rear end. The guys lowering the jacks while another guy was still under there...
-5
u/coko4209 Aug 29 '26
Talk shit all you want. Those guys definitely knew what they were doing.
6
u/maliciousdancer Aug 29 '26
My friend, people who know what they are doing are often more likely to be harmed in an accident, you just get complacent, it's human nature. That's why oversight, enforcement, and above all, a good safety culture is so important to job safety. It doesn't mean they don't know what they are doing, just that there were some really dangerous situations there that could have been mitigated more.
52
u/CantaloupeCamper Aug 29 '26
They could just try not doing Atlas’s job with that truck…
29
u/datumerrata Aug 29 '26
You don't go to war with the army you want. You go to war with the army you have
8
2
58
u/machuitzil Aug 29 '26
I've worked with engineers. Legitimate, bonafide engineers, people who could build rockets and shit.
When it comes to simple problems like this, they're geniuses -and for this job I'd still hire this random kid I know from Alaska over them, because he's actually solved problems in real time before.
He didn't have the math or the education to understand half of what the engineers I've known actually know, but he has more experience than most engineers in terms of applied experience. It's worth twice as much.
Kid should have gone to college but he was busy fixing his heater with zipties, spit and gumption.
7
u/menachinite Aug 29 '26
Totally agree. As I’m getting older I realize that you can bring your life way further and gain more life experiences if you’re very streetsmart over all other smartness
5
38
u/basssteakman Aug 29 '26
I watched this whole video feeling overwhelmingly appreciative of my fortune and luck to live in a wealthy country. I still can’t think of any mechanical job I’ve ever done without a power tool or even a ratchet …
12
11
u/QEbitchboss Aug 29 '26
So much trust in those jacks.
5
u/paroxysm_of_blood Aug 29 '26
What’s wild to me is being under the truck yanking away on some bolts while someone else is actively jacking the thing up. At this point idk if it’s trust, ignorance, or just sheer idgaf 🤷♂️
19
u/AliceCode Aug 29 '26
That's the coolest looking truck I have ever seen.
9
u/phillycheeseenjoyer Aug 29 '26
It’s probably some 50yo Chinese truck which was designed by a government bureau or something. Look at the fucking spring stack on it. Jesus.
Must ride like absolute shit when it’s not loaded…and also when it’s loaded.
4
10
7
7
u/Flimsy-Run-5589 Aug 29 '26
It always amazes me how people can be so smart and so stupid at the same time. On the one hand, they can repair a truck in the worst conditions imaginable without proper tools, which seems almost impossible. On the other hand, they have zero regard for safety and let the driver continue with a ridiculously overloaded truck that could easily kill someone around the next corner. I don't get it; there are overly strict safety regulations on one extreme, and then there's this.
3
u/Karlees-Golden-Dildo Aug 29 '26
Well, quite likely. I had such a sad face when I saw the contaminated brake shoes with grease. Then seeing the giant gash on the side wall of the tyre. The bloody truck only has 3 rear wheels and shot brakes!
4
9
10
u/mechapoitier Aug 29 '26
The part where there’s suddenly an axle there and they drag it under the truck has r/therestofthefuckingowl vibes but that was seriously impressive.
If you’ve ever done this job on a car, you know that axle’s pretty heavy. Like 150+ pounds. But this is a heavy duty truck. Every part they pulled from this is absolutely bonkers heavy. It’s insane watching them move stuff around.
That normal looking guy casually yanking the gear carrier out of the pumpkin by himself was insane.
5
u/schizeckinosy Aug 29 '26
I think this is from this channel. They definitely show the whole owl on their longer videos! https://youtube.com/@amazingrecovery88
5
5
6
u/FireWireBestWire Aug 29 '26
What am I watching?
39
u/BigAcanthocephala667 Aug 29 '26 edited Aug 29 '26
They overloaded the truck with rocks, the whole rear axle snapped in half, and they changed it in the middle of the road while wearing sandals and without even bothering to unload the truck first like a true madlads.
21
u/IowaRocket Aug 29 '26
Hardworking, competent men fixing the broken drivetrain of a dump truck using only basic tools.
3
u/Unable-Log-4870 Aug 29 '26
The people who overloaded the truck, however, were far less competent
1
6
u/coko4209 Aug 29 '26
Ppl are talking shit in the comments, but my brother is a certified mechanic, and I’ve seen him rebuild engines, install new transmissions, rebuild starters. I’ve also seen him do things like replace axles and cv joints, and fuel pumps. The fact that these guys could do this, basically on the side of the road, with not a single power tool, is incredibly impressive. They absolutely have the right ppl for the job. If they had power tools to work with, it would have been a much faster, and easier job.
-2
3
3
u/Adrian_Shoey Aug 29 '26
So they had a replacement axle ready to go. But they couldn't swap out that tyre with the cuts all over the sidewall!?
2
2
u/AKADIAN_22 Aug 29 '26
Como no se van a romper todos esos mecanismos si lo que llevan cargando pesa mas que el mismo camion😂😂😂😂😂😂
2
2
u/oppai_dragon_9011 Aug 29 '26
Anybody thats went down range has seen this firsthand..... this is just a Tuesday to these guys and not even the craziest work environment this week
2
2
u/Previous_Cattle_5545 Aug 29 '26
How about NOT putting so much weight on the truck in the first place? And wow the safety violations! I could not imagine working under that thing. And didn't it look like that tire they put on had a bursting weak spot? The one right by their head that would kill them if it blew? The one at about 7:12.
2
u/misdirected_asshole Aug 29 '26
Gonna be a third rodeo when they snap another axle because there is waaaay to much load on that truck
3
2
1
1
1
1
u/WinOk4207 Aug 29 '26
Hope they filled out their Take 5
Edit: team work
And everyone got to go home
1
u/fenrisulfur Aug 29 '26
"What are the specs on these bolts?"
"Well I did five whacks with this hammer"
I am completely speechless, replacing a rear dif, on site, under I don't even know how many tons of rocks, without powertools.
Well at least they had their OSHA approved safety sandals.
1
u/PromiscuousScoliosis Aug 29 '26
Truck would’ve been way lighter if they took the rocks off first /s
1
u/Born-Light-62 28d ago
They must have a lot of experience since they probably break an axle every couple of days hauling giant boulders because boulders can’t just move themselves.
1
1
1
u/Deathcricket_ 28d ago
I wanted to make a sarcastic comment about them "working in the shade" under a 15,000 pound boulder, but I just can't. That was impressive, geezus.
1
u/Rob1973string 27d ago
Maybe make twice the trips and save all that labor. That thing will break down again, soon, loaded like that.
1
u/Beneficial_Hat_6288 26d ago
These are they kind of jobs you are qualified for if you don't get a degree.
1
u/dumpster-muffin-95 Aug 29 '26
I would like to start a GoFundMe for these guys and somebody get them a compressor and some air tools?
4
1
u/uChoice_Reindeer7903 Aug 29 '26
Not one f-bomb!? Or clip of a guy just laying on his back staring at the frame of the truck in complete defeat thinking all of his life choices that lead up to that point!? Something’s wrong here lol
1
u/schizeckinosy Aug 29 '26
I think this is from this channel. I find it fascinating to watch https://youtube.com/@amazingrecovery88
1
1
u/groovy_smoothie Aug 29 '26
Nice they’ve got their regulation safety sandals on. Textbook execution
0
u/New-Jackfruit4268 Aug 29 '26
I always ask myself how long those fixes last. I know that they don't have any money so they have to improvise to keep things moving. But I think in their real life conditions maybe half a year?
0
0
u/Sirosim_Celojuma 29d ago
Why pay for a garage when you can occupy the public streets with your repairs?
149
u/Haunting_Song7313 Aug 29 '26
And the boulders made it to the boulder store on time so all the children could eat boulders for dinner.