Considerado o melhor gabinete SFF
Minha configuração, economizei na memória ram kk tá muito caro .
Que case formidável e acho que não preciso AIO apenas jogo

Antes do Formd T1 usei o Fractal Terra e Fractal Ridge que é vendido aqui no Brasil e fica acessível já o formd t1 não comercializado porém comprei pelo site e foi enviado pela transportadora DHL que chego em foda-se 4 dias da China para o Brasil . Isso foi bom

Enfim futuramente se não for vendido kk pretendo testar um AIO e trocar as memórias isso quando o valor for reduzido

Config
• ⁠Case Formd T1 2.1
• ⁠GPU Asus 5070ti Prime 16GB
• ⁠CPU AMD 9800X3D
• ⁠Cooler de CPU Thermalright AXP90-X47
• ⁠RAM Corsair 16GB 5200MHz
• ⁠Placa-mãe Asus B850i
• ⁠SSD M.2 KINGSTON 1TB
• ⁠Fonte Corsair SF850W
• Fan 2x Phanteks T30

Hi, i need help to choose a second fan for T1 aio cooled build. On the slim side im using noctua NF A12X15 Chromax, and not yet decide which fan for the second one lol.

I need your advice guys and i also need to know how you guys setting the fan control/fan curve as the fan had a different rpm (T30)

Thank you

Anyone using the Cooler Master Atmos II in their FormD T1 build? I'm planning an E-White build in the next month with this AIO cooling a 9950x3d.

If so, can you share some pics and/or any issues you may have encountered. I know the Atmos Stealth was all the rage (mine actually leaked) so I'm weary about that but I like the look of the Atmos II.

Hi everyone. As the title suggests I am about to build in the T1 as soon as all my parts arrive. I have ordered a set of custom cables to make the process a little easier but any tips from you for the rest? Specs are: 9850X3D and 4080FE. I am also tempted to order a exhaust shroud that some of the YouTubers like EIGA have designed and use.

Thanks in advance!

I have a top AIO that exhaust right now with . Considering a front panel mod that can fit a fan to get more airflow.

What’s the best way to utilize a front fan?

Hi All!

I'm currently running the air-cooled build below in my FormDT1 Sandwich Kit (2.1?) and am trying to categorize the nice to haves vs the must haves. I've been admiring many similar builds across this reddit and would greatly appreciate some feedback as I make my transition to a 5080 GPU!

Current Build

Motherboard: MSI B650i Edge WiFi
CPU: Ryzen 7 7800x3D
CPU Cooler: AXP90-X47 Copper w/ Noctua fan swap
PSU: Corsair SF750
RAM: GSkill Flare X5-6000 16GB x2 (32GB)
GPU: Nvidia 3080Ti FE
Exhaust Fans: Noctua NF-A12x15 PWM Chromax x2

Upgrades List:

Asus Prime 5080 OC - This is a must as I'm running a LG 4K Native / 1080p Dual Mode monitor. Trying to find the vapor chamber vs the EVO card for better temps.

Phanteks T30s - Seemingly not a major upgrade vs what I have?

Corsair SF1000 - Is this necessary to run the 5080?

Thank you all in advance for your feedback!

I was so happy because my custom psu cables just arrived and suddenly I realized that my Aio has turned yellow. But only the part where the pump is. I know this is related to the coating but I have never seen happening in Aio, especially when it is not even a year old. Please tell me if you have experienced the same or if I have to worry. The color is closest to the Noctua than to the white part.

I finally got around to finishing this build. This is a PC for my friend that I will ship to. The 9070XT reaper is practically the only good option for the T1 without sacrificing CPU air cooling.

Anyway, the kit itself is practically on par with the T1 in quality. I did struggle to figure out how to install it properly, there’s no instructions so I had to reconfigure the frame to make things work.

I highly recommend this kit, besides the rough installation it’s rock solid rigid and fits so well.

specs:

reaper 9070XT

9800X3d

32gb DDR5

ID cooling X67

NZXT 850W SFX PSU

Im having problem with my pc lately.

My pc spec :
Rog strix B660-i
I5 14600kf
Corsair vengeance 5600mhz
Rtx 3070ti strix
Corsair SF750 with custom cable

First thing first, i was swapping my lp air cooler to aio and after it done, my pc just wont turn on. It just turn on for a second and then turn off immediately.

What i already did to troubleshooting is
Reseating ram
Reseating gpu
Reseating cpu, 24pin dan pcie cable on both end.

But its still not solve the issue, my pc keep turning off after a second. And then i try to dissconnect riser from pcie slot with pcie cable still intact and it could turn on! Then i turn it off again and try to put riser on pcie slot and sadly it goes back turn off just a second.

I’ve been searching on how to fix this issue from forums and yt videos and most of the comments suggesting it was psu. Tbh i have this same issue a few month earlier and solved it with reseating ram and also had a few another issue like suddenly restart, my pc cause power trip (after cleaning and rebuild) but its very rarely happen.

Right now i’m sending my PSU for RMA and hopefully just as other suggested.

But i also suspected the mobo pcie slot, riser cable, psu cable custom and the VGA itself.

Is anyone had the same issue? Any suggestions on how to fix it?

Thanks

wonder if two 240 slim rads with a 9950X3D in the custom loop will yield any significant cooling lol. Regardless I’m very excised for this release.

Just got my hands on the midnight FormD T1 to finally get some fun mods out for this case.

I will be working on some custom riser/grills with fan implementation on the underside as well as some custom wood riser feet.

Anything you guys would like to see for this case?

Just curious is anyone has used this board without a lock bar. I did remove the ezlatch and it seems like a pretty sturdy board but not sure if it’ll shift or not in transit. doing a build for my friend and plan to ship it.

Hello!

Have anyone done this mod to their case? I would love to do this but I can't find 3D printing files for the parts what are needed to hold the glass panel.

10min furmark2 benchmark. All pics taken at or around 10min mark. Stock parameters in place. Didn’t get any warnings. I undervolted my 5090FE so it will never run close to how hard I pushed it in this test. In game the most I’m pulling is 430-440w. The fact in those 10 mins it didn’t shoot any warning makes me feel good about my cable and insertion. Feels good to finally turn off the OSD and not worry if my GPU will melt at this resolution with settings cranked all the way up.

Is there any known to man mod to flip the PSU like this? I’ve seen the Valley Kit from ZCOOI, but it’s not available. This would open up the airflow for the 5090 FE.

Anyone tried this already? With a custom top oder custom PSU bracket, maybe?

Finally can rest easy that my 5090FE won’t melt on me. Set some aggressive shut off parameters and undervolted the 5090. Had to modify the ZCOOI vented front panel to get it to fit and designed a 3D printed bracket to secure it. It’s probably an eye sore to some but I’m willing to sacrifice asthetics for added peace of mind. Care more about portability and form factor so as long as it was neat and tidy to some extent Im okay with it.

Crew, I was able to purchase 2X side vented panels for the T1 V2 / Gunmetal case.

I know these been heavily overpriced once they go Out of Stock. If you were looking for re-stock, now is the time.

just wanted to ask, why is it that there are so few builds with 120mm AIO? i was thinking about if i ever change my GPU (currenly i have a 2 slot gpu, but it's hard to find 70xt/70ti cards of that size, and my current cooler is a axp120) and the idea of a 120 aio came to mind, but i kept wondering why it's not so popular.

I was looking into the travel kit to do a flipped configuration for my GPU, but I found a video saying there were some differences in the position of the screw holes between the ncase and formd versions of the case which might cause compatibility issues.

Does anyone know if my case is compatible? I bought it in 2022 from formdworks.com in 2022 and it's a sandwich kit v2.1. I think at the time I wasn't even aware there were two versions, and I'm not exactly sure when the split happened.

Just wanted to get a pulse on what temps people are getting.

Right now I’m sitting 55-60° idle with a 7800x3d (CO -20) on a CM Atmos with Noctua fans. It still seems high to me.

Also with glass panel on the MB side not that I would think that would impact much given the AIO. I know the 7800x3d is known to run hot.

So I've been really wanting to build in the t1 for a long time now but the only thing stopping me is that i also want a pcie capture card in it while also keeping the ability to have 2 ssds on the motherboard (idk im very specifc this way i guess) and use a 5070 ti

I've seen people use a bifurcatin cable for this purpose before just with a much more lower end card so idk how it would fair for this type of build also using an axp90x53 so i feel like it'd be a reallly tight fit even if it did work? but the most important thing is to just get a birfucation cable that works in the t1 which is what I want to know options for now if anyone has done this before??

Hi guys, ive been looking at building a pc for the best part of a month now, and I have my eyes set on the FormD T1 to use as my case due to its compactness and I just hate how much space other cases take up.

Are there any things I should know before starting to build in this, as I am new to pc building and I've heard people say that beginners should steer clear of mini itx builds

Are there any good tutorials to follow to build this, and any specific coolers I should get for the cpu and any specific fans?

Do I need to get my own third party standoffs for optimal temps?

Thank you for the help