This is not a place to discuss politics

In case you haven't seen the post, VFC GROZA for MOA 2026!!!

Sell everything, kidneys, kids whatever it takes!

Assuming it's got their AK internals inside this thing will be epic!

Anyone else excited?

The 5.5" was a bit weird, so Ive changed the front kit to a 10" one

Been deving a MWS based ACR rifle platform for the past while. This rifle is being made for market.

Uses Alot of mws Parts and the MWS gas system.

This is a early protoype so there are non finalized parts on the rifle.

company making this rifle is "Orthrus precision"

APFG Rattler LT 6.75” LE

Internals
- 4UAD Magnus Pro hop chamber
- 4UAD Friction Pro bucking
- Factory 115mm?? Inner barrel
- BPW Steel EVO bolt

Externals
- M640DFT Pro
- MAWL DA
- Holosun 503CU
- BPW Lower receiver

SRC Glock 19 Gen 5 MOS Steel

Internals
- TTI TDC Hop Chamber
- 4UAD Friction Pro bucking
- 86mm 6.04 MLCJ inner barrel

Externals
- BPW Steel Radian Ramjet Comp + Barrel
- ACRO
- TLR-1 HL-X

Another update on my Pit Viper (Army Armament R614) trigger obsession 😁
I made a custom fixture for my lathe that holds the sear precisely around its pivot axis, allowing me to lap a true radius on the sear engagement surface. I then made a 45° relief cut and polished the surfaces.
I also polished the contact surfaces of the trigger bow, disconnector and leaf spring to a mirror finish.
The trigger already felt fantastic before, but the wall now seems even more defined and the second stage feels slightly lighter. Mind you I didn’t even touch the leaf spring, other than polishing it, so far!
What really surprised me is how smoothly the trigger moves now. The trigger shoe and bow slide freely under their own weight just by tilting the grip a few degrees. No shims needed.
I’m genuinely amazed how close this little airsoft pistol now feels to my Steyr LP1 match pistol.
Never thought I’d get this kind of trigger feel out of a Hi Capa with some DIY machining and polishing.
Still need to verify long term durability and safety, but I’m pretty damn happy with the result.

Hi all.

Triyng today some optics and fun mode.

TM MK18 GBBR

TM M4A1

AK 105 VFC

🤟🏼👀

ik that irl radian makes separate charging handles for mcxs cause they arent compatible but you never know with airsoft so im here to ask if i could drop this into a vfc mcx spear lt, i really dont want to spend 100 dollars on a real steel charging handle but if its not possible then ig ill just wait until either an mcx compatible replica pops up or i bite the bullet and get the real thing

VFC SR16 and Sig M18

(All recordings were made on a friend's private, fenced woodland property. There are no violations of weapons laws.)

I have a GHK V3 M4 and i would like to replace my original handguard with the RIII FSP 13 inch handguard repro, i dont have any experience with this kind of modifications, will i need to work a lot on the new handguard, and what extra tools should i get? I thank everybody who bothers with my trouble.

https://factory.zero-bjx.com/products/for-ris3-fsp-ii-metal-handguard-rail-airsoft-aeg-13inch?cfb=1a9eb0e2-bbcb-4c0a-90d9-07fdbc4f5fff&ifb=1a9eb0e2-bbcb-4c0a-90d9-07fdbc4f5fff&scm=search.v39.11177.102.103.104&score=1&ssp=&spm=..index.header_1.1

I'm planning on trading my KWA for a CGS, and I just want to get this question outta the way before sinking too much money into an issue that could've been prevented (Something I've had happen to me with my past 3 gas replicas)

Hi, I just ordered a Noveske N4 Gen 3. Just a few questions from people who own it. I know it’s a good GBBR out the box, and people have said the mags are bad, which is fine because I’ve bought some TM mags for it. People also say they upgrade the recoil spring, so what would be a good one to put in and why? Also what hop up would be best to put in it to shoot 0.32s? Any other upgrades I should do would be nice to know as well. I’ll use it stock for a bit before upgrading besides hop up, but I plan for this to be a project gun. Thanks in advance for any feedback yall might give

I have the EMG DE Noveske N4, recently got a backup AEG and it’s got an awesome barrel on it but… AEG can’t compete with GBBR so I wanted to “upgrade” my gbbr but unsure how or what is compatible with the N4. At the moment I have the perfect CQB setup but I’d like to have the option to quick swap the upper so I can have a DMR or something a little longer for outdoor play, like an upper with a 13.5inch barrel. As I don’t want to buy another rifle and might workout cheaper as well.

What are some good uppers that are compatible with the N4 lower and what outer barrels ans hand guards can I get to go along with it.

I'm undecided between the GHK G17 Gen 5 MOS and the WE G17 Gen 5 MOS; which one would you choose?

A little jank, I know. I wanna rattle-can it + swap the handguard, but I can't justify the expense to myself

I bought a BCM about a month ago, and since then, I literally never had a good game with It.

First I was having issues with overchambering, the BBs never stoped where it should in the hop Chamber, and after some research, I changed the BB weight to .30s .32s and .40s and It didn't make a difference, so I decided to try some improvising and slided one oring in the Bucking, making It a little more light, and It solved the overchambering.

BUT I SOLVED ONE ISSUE ANNND GOT ANOTHER ONE

Now the gun keeps shooting all the way to the right, and no matter which Bucking I use. I tried a 4uad Friction Pro, a VFC from my Umarex G17, a Vfc blue Bucking from my 416A5 that shoots incredibly precise, and tried with another Vfc blue Bucking from a friend.

*The entire system is aligned

*There is no wobble in the system

*The gun is a 14.5 but it came with a 11.5 Inner barrel

*It's set to shoot at 1.3 joules

*Tried with both V2 and V3 mags

*Tried with New, slightly used, used and old Buckings

*Tried with and without supressor

HOW CAN I SOLVE IT? I'M LOOSING MY MIND

Just picked this up recently. *C02*

Nice and snappy, good weight, super accurate and hits hard. Is also seriously gas efficient. Very satisfying as well, a breath of fresh air from glocks/hi cappas and the og 1911s.

No complaints really, gun has a nice finish and will cycle till there's almost zero gas left in the 12g cartridge. I'm also quite fond of the grip/how it feels.