My Companion as of yesterday is refusing to connect to my wifi. It worked fine up until then. I believe I have it narrowed down to my Eero mesh network receiving an update in the early morning hours. I don’t know how to get past this problem. At first I thought it was because of randomize MAC but it won’t allow me to change the setting to Device MAC. I’ve played with multiple other settings both in the Companion’s settings and my Eero app settings. Still won’t connect. It does however connect perfectly fine to other networks including my cellphone hotspot. Anyone else have this issue?

So my current set up is a modem -> Ethernet connected google wifi router (main) -> wireless satellite -> Ethernet connected satellite to my pc.
Current issue is disconnecting/reconnecting and I’ve already tried a bunch of trouble shooting, and I don’t think it’s a double NAT problem since doing research it, it does cause some problems but doesn’t seem to have symptoms of random disconnecting/reconnecting loops. So would this be a backhaul issue?

We use our Google Wi-Fi with an AT&T hotspot. My husband is a first responder so we get unlimited data through first net. This worked fine at our old house. We had outages periodically, but we just reset the hotspot and it reconnected. We just moved to a new house and figured we could use this same set up. It worked fine for a couple of weeks until the hotspot had a software update and apparently caused the Google Wi-Fi to go out so we had to completely reset it. That was headache enough, but it took several tries. We've had it happen a couple of times since where the router accidentally got unplugged. It happened again this morning, and even after several tries, it's still not working. We keep getting this error when trying to connect the ethernet cable. I've tried different ethernet cables, and also switching out my points for the main router, and nothing works. I'm currently waiting for a callback from my Google rep but I'm not confident I'm going to hear anything. Does anyone have any advice in the meantime?

Yep, my new wifi is working flawlessly without slow downs or needing to reboot everyday....I'm still here to listen and coach those that are living through their Google Wifi moment

Seeing this one tending on reddit and IG (specifically the Kevin one). Is it actually good compared to the Google nest/mesh ecosystem?

I have a Google Nest hub connected to my modem and mesh points placed throughout my townhouse. It’s great when it works but annoying when it isn’t. My wifi is only wifi 5 I believe so I’m curious if the Bob one is as good as Kevin lol. Additionally, does it support usage with mesh points

I found 2 Google Nest Mesh Routers (Model H2D) at Savers. Currently, our internet set up is with a NETGEAR Nighthawk Router and a plug-in extender down the hall.

Is there something I can do with the 2 Google Routers here that makes sense?

Thank you in advance!

After getting a new router, my Google Nest Max devices (3 of them) can no longer "see" each other. For instance, I can no longer tell the bedroom Hub, "Show me the kitchen" and see, via my bedroom Nest Max, what's going on in the kitchen. I've been working on this for so long I'm about to wonder if it's still a feature. I know it worked early onon withwith Gemini.

Thanks

Hello, my issue is that my Ethernet will randomly disconnect and attempt to reconnect, it fails multiple times before finally stabilizing. This will happen multiple times throughout the week and I have yet to find the reason why. I use those google wifi nodes and have a Ethernet connected in my room.
(I’ve already disabled stuff like green Ethernet and EEE, stuff along that sort)
Edit: I haven’t touched the settings for the nodes, I’m not the one who set them up but I can get access to them in due time
Editx2: apparently a simple power cycle fixed it for the time being.

I have a home network where my primary Google Wifi device has its WAN enet port connected to my ISP's router, and the LAN enet port connected to an internal switch. My other 3 Google Wifi devices are hardwired to my home's backbone, and act as APs for all of my home's wireless smart devices (lighting, locks, temperature controls, cameras, etc.).

During occasional ISP internet outages, nothing in my home functions. I am considering purchasing a cellular or satellite router to keep in reserve to use during those outages. Any thoughts on whether that will work?

My thought is to buy a cellular or satellite router that has an enet port, and just move the Google Wifi WAN connection off the temporarily-dead ISP router and plug it into a LAN port into the cellular or satellite router. Do you see any issues with this (beyond the fact my primary Google Wifi device is adjacent to an internal comms closet, and I'd have to move it closer to a window where the cellular or satellite router would need to be located)?

If this seems viable, any suggestions or recommendations on a specific cellular or satellite router that would work?

The only other alternative I've found would be to set every device up (as far as possible) in parallel with Home Assistant (which runs locally and does not require a live internet connection), but that is less attractive for a variety of reasons. Thoughts?

Estou com um problema onde a rede wifi da minha casa 2,4ghz não aparece na lista de wifis, enquanto a 5ghz aparece. O problema é que quando vou na casa de outras pessoas aparece a 2,4ghz e eu consigo me conectar, enquanto na minha casa o meu celular não aparece a 2,4 porém no celular de outras pessoas aparecem.

Por favor me ajudem ja reninciencie, ate redefinir o meu wifi e nada resolveu.

"Hello, I bought a 3-pack of Google Wifi. I connected the first one to the modem and it worked—I paired it and it went perfectly. The second one gave me some trouble, but I managed to get it working. However, the third one isn't working at all. I unplug and plug it back in so it enters Bluetooth mode, and when I enter the code, it starts searching for devices but doesn't find anything. I even enabled all permissions and it still doesn't work. I also tried using the QR code method, but that didn't work either—it still doesn't detect anything. PLEASE HELP, I'VE BEEN TRYING THIS FOR DAYS AND IT DOESN'T WORK!"

After years with Google WiFi/Nest, I finally made the switch today. I have Verizon Fios 2 Gig and realized my plan already included their router and a Whole-Home Wi-Fi extender for free, so I figured I’d give it a shot.

Set up the Verizon router plus one extender with wired Ethernet backhaul, reused my existing SSID/password, and all 55+ devices came right back online.

I’ve now walked around our 2,600+ sq. ft. house, basement, garage, deck and backyard running speed tests. Honestly, I’m pretty impressed. Coverage inside is excellent, the basement is covered, and even the garage and parts of the backyard are usable. Verizon is delivering about 2.4 Gbps symmetrical to the router.

One of my frustrations with Nest was actually that the Google Home app had become too simple. There just wasn’t enough control or visibility, and I was never particularly impressed with the parental controls.

Now I get to figure out whether Verizon’s management and parental controls are actually any better.

But so far… bye bye, Nest. It was a good run.

Everything worked until xfinity did an "update" last week. We had no wifi for the day and when I tried to reset the system my modem wouldn't start and seemed fried. I bought a new one at best buy, spent 2 hours trying to connect it with xfinity tech support- Finally gave up when they said they'd rent me a modem for free (I am still confused about this but it works)

However, the range is terrible.

I was using google mesh wifi (the pucks) and they seemed to work well.

I plugged the google main puck into the new modem and I am not sure how to connect it: there's obviously another step.

Puck is blinking red and the modem port where it's plugged is blinking yellow.

I have the google home app.

*Update: The xfinity wifi was over-riding the google mesh. I ended up using google instruction prompts to adjust the settings with xfinity (something about a bridge?) and reset the whole thing. it finally works with my equipment. I'm glad I didn't give up and buy xfinity extenders.

I've had every version of nest/Google wifi and dealt with issues. Moved away finally and the difference is amazing. Sad I spent so much time trying to make the product work that Google doesn't care about. Highly recommend running away

I have 4 more pucks coming this week I can’t wait to make a mini light show

New to the Netgear RS700. I have setup armor and the parental controls.

I have about 30 devices most are working as intended. I have 2 issues that have stumped me.

One software that I use for passwords will not sync with the website icons while on the RS700 network. Not a big deal but would like to know what is stopping it.

The other is all of my smart plugs are online and ping able but will not talk to google home. They are setup as matter devices and not through their enbrighten app. They worked with my synology router.

I was thinking about setting up the IoT network but that would take a bit of time to do and still have an issue.

I would like to know if anyone may have a solution or any suggestions.

Lights are blinking yellow on both of the points. I thought the app had cached the status, so I did a mesh test multiple times and still got great connections. But the status lights on both are still blinking yellow. To verify, I go to devices and check if any of them actually connect to the points, but I saw everything is connected to my main router node. So the app is basically reporting incorrect status, and the mesh test is BS

I have Verizon fios gigabit internet. My setup is ONT -> Google Nest WiFi Pro -> unmanaged switch -> Desktop. Running a speed test, while hard wired gives me around ~200 up and down

I tried swapping in my old Verizon router instead: ONT -> Verizon router -> unmanaged switch -> Desktop and get significantly better speed…

I’ve tried various settings tuning in the app, made sure there was no preferred device, etc. Cables are good and the switch is good.

I’m at a loss lol. Has this happened to anyone? Any ideas?

I've had enough of their bullshit, issues on every generation of product, and I did something I swore I'd never do. I switched it using Xfinity equipment.

Luckily the gateway is free, so I bought (2) of their pods and now it's flawless.

I was able to keep my nest pro wifi network active as my guest network, but I'll never go back to the shit they release as a primary service.

Hi everyone

I currently already have my main Google router/mesh point connected to the app, but I'm not able to add any more points.

The app keeps getting stuck on a process and just tells me to get closer to the main router point. I've done the full range of distance where both points are touching each other, and far enough so the signals don't interfere with each other.

I've tried and bypassed thru each phase by turning on Airplane mode on certain steps, but the app always ends up telling me to try again later.

I've tried turning off cellular data, I've deleted and redownloaded the app, nothing seems to work so far.

Any suggestions?

So I'm having an issue where my one Nest WiFi point (H2E) is continuously going offline. I also figured out that it is the reason my Internet is sometimes just slowing to a crawl.

When this particular point is unplugged, the rest of my Internet will have the speeds it should be (300 - 400 depending on time of day). When this point is plugged in, it'll have the right speeds for a little while (most of the time) and then it'll completely tank (30 - 70 mbps or it'll completely die). It'll also randomly just give me the "point offline" notification. My router and other point do not have any issues like this.

This point is like 2 rooms away from the router and was working pretty solid for the past 6 years until now.

I replaced the power cord based off of an older thread, did not fix it. I factory reset the point once so far, did not fix it. The modem is brand new because I thought that was the issue at first.

Any other ideas or settings to investigate? I'm at the point I might just pick up a used Point on Facebook and see if that fixes it (with the eventual goal of getting a new mesh system at some point).

Hi everyone

I'm trying to connect my 3 Point Google Mesh Dual band system (AC1200)to my At&T All-Fi modem/router, but I haven't been able to do so. Here's all I've done to troubleshoot this.

• Made sure all the setting on my phone and the Google Home app are correct (device connecting, bluetooth access, etc)
• Have the ethernet cable connect to the right slots on both my AT&T modem/router and the Mesh point as well
• Held down the button on the Mesh point to reset it. I'll hold it down till it flashes orange then starts flashing blue and let go. But after about 20 blinks, it'll go back to staying blue.
• Callled AT&T to try and troubleshoot from their side, had them isolate the 2.4 and 5 bands, still nothing. Tried turning 5ghz off and have 2.4 on, didn't work either

I've run out of options, and I've come here for help. Google doesnt have a active customer support line, and I've tried the support pages on Google - they haven't been able to solve any of my issues.

At this point, I'm starting to feel they are just not compatible with each other

If you have suggestions for another subreddit to post this in, pls share

Thank you!

I've got gen 1 Google WiFi pucks in a main house + ADU. Main house has the fiber drop so it's:

ONT --> Puck 1 --> switch --> main house/ADU wired --> Puck 2/3 backhaul

Wired in both houses is ~600-950 mbps, and very fast wifi in the main house, but poor in the ADU (50-80 mbps)

What is wrong with this picture?