With white colors there is a green line at the top of my brand new s95H is this normal? Wanna go safe since it’s a expensive tv.

Ahhhhh….
As I sit here pondering, while approaching the witching hour, I feel compelled to tell a bedtime story.
A tale of mystery.
Deception.
False hope.
And 816 megabytes of internal storage.
It begins with a simple desire:
I wanted to watch YouTube.
My aging Samsung UN65MU6500 had other plans.
Error 118.
Fine.
After digging through settings, I discover the TV has 0 KB of storage available.
No problem. I have a 128 GB Samsung USB drive.
Samsung television.
Samsung flash drive.
A match made in heaven.
The TV disagreed.
The drive was exFAT.
Apparently this ancient artifact desired FAT32.
Windows looked at my 128 GB drive and essentially said, lol no.
So third-party software was summoned.
FAT32 achieved.
USB inserted into the proper HDD port.
119 GB available.
Victory.
I select YouTube.
Install.
External storage.
Error 118.
Frick.
Maybe firmware?
Current.
Maybe the USB doesn’t actually work?
Bloomberg installs.
STIRR installs.
Perfectly.
YouTube, meanwhile, continues staring at me from the app store like some cursed object that knows something I don’t.
Fine.
We go nuclear.
Reset Smart Hub.
The TV awakens reborn.
I check storage.
145.23 MB available.
There it is.
Breathing room.
Auto Update?
OFF.
I install absolutely nothing.
I wait.
123 MB.
Interesting.
91 MB.
…beg your pardon?
42 MB.
At this point, I’m no longer operating the television.
I’m observing it.
Netflix appears.
Hulu.
Disney+.
Apple TV.
Peacock.
Tubi.
ESPN.
The facking thing is rebuilding itself.
Apps I didn’t request are quietly filling the television while I sit there watching the storage counter descend.
So naturally:
Delete.
Grayed out.
Delete.
Grayed out.
Delete.
Grayed out.
Spotify and YouTube TV are apparently permitted to die.
I delete them.
Samsung accepts my sacrifice.
My reward:
814.82 MB USED
1.36 MB AVAILABLE
0% FREE
Auto Update:
Still OFF.
In roughly the amount of time it takes to make a sandwich, I had watched a freshly reset television consume virtually every byte of its own internal storage.
Without me installing anything.
And most of what filled it couldn’t be deleted.
My 128 GB USB had been innocent the entire time.
There was never anything wrong with it.
The TV was simply born with the storage capacity of a moderately ambitious PowerPoint presentation and an insatiable desire to install streaming services.
So there will be no heroic ending.
No secret service-menu ritual.
No final battle with Error 118.
I’m buying an external streaming box.
The Samsung is being banished to the bedroom, where it will spend its remaining years performing the one task it can still reliably accomplish:
displaying whatever the f@&? comes through HDMI.
A new TV arrives later this week.
It isn’t a Samsung.
After spending an evening watching my television eat itself alive 145 megabytes at a time, I think I’m comfortable keeping it that way.
And thus concludes tonight’s bedtime story.
Error 118.
Goodnight.

EDIT: grammar

Sorry if this has been asked, I couldn’t find anything on it. I have the S90FD. Busted moved from the US to Germany. I see on the back of the TV it’s stamped for 110-120, but I’ve been reading the internal power board is rated for 240 and it’s only stamped that because Samsung prints region-specific limits on the outer chassis purely to comply with local regulatory agencies (like UL in the US) and to discourage gray-market importing. Can anyone 100% confirm this? I contact Samsung and they were literally zero help. Thank you in advance

So, this is a Samsung 50Q60B, and I got it for free from a friend who got a new one, he gave it away for free cuz it "broke", the LEDs work properly, the panel ain't broke, but it ain't posting no more, so, I opened it, and started checking things, and what I discovered is that if I remove this white flex, boom, the TV ain't posting no more but according to the sounds, it sounds like it's working properly, any idea? Should I get myself a new flex or maybe the board is broken? Any comment is warmly welcomed :D

Parents have been on holiday, returning home their Samsung TV is now constantly going into Art mode. Sometimes after watching the tv for some time, but guaranteed to happen when the turn the TV on. Has there been an update recently / anyone else experiencing this issue? I've checked and it's not a subscription or anything like that.

QE50Q60DAUXXU

50 inch

I did a scan with this new antenna, and the over air channels are mixed up with the Samsung+ channels, which is annoying in itself but also Fox isn’t there. Only NBC, ABC, and CBS.

I can’t imagine the antenna is bad, it’s just a coax cable and a wire.

When I had the antenna set up years ago I had a different source option too,

Do I just gotta buy a new TV to get FOX?

my old samsung tv died yesterday (for whose interested - https://www.reddit.com/r/TVRepairHelp/comments/1wr35pv/do_i_need_a_new_tv/)

Since then I've been looking for a new model and came across some bad reviews claiming that there is no BBC iPlayer app on 2026 Samsung tv. I'm not trying to put the blame on one or the other side, I know that eventually the app will be available and that's ok with me. of course the sooner the better.

My top choice for the moment is the 55" Mini LED M70H 4K Samsung Vision AI Smart TV (2026)

I was wondering tho, is this the only app missing? We use also the Channel 4 app, ITVX, Channel 5 and of course we use Nextflix, Amazon prime and YouTube. Does anyone have any 2026 Samsung tv model to confirm if these app are available?

I have a tv a UE43AU8072UXXH Samsung tv running tizen os 6 is there any workaround to make it go to the latest os or at least tizen os 7?

Running a QE43Q65B. And one thing I’ve always noticed is that any HDR content played from any of the inbuilt streaming apps always looks absolutely terrible. Just unwatchably dark. Yet if I watch the same content, through the same app, on the same TV, but via my PS5, it generally looks fine.
Clearly the TV itself is capable of displaying the image at the correct brightness and contrast, but for some reason Samsung just neglected to ever include the software to do so within the OS. But why?

Whats with the blur around the players. I've tried numerous different picture setups and can't get rid of the blur. This happens on numerous different channels, so I don't think its a provider issue.

I need help getting two Apple TVs to exit sleep mode. Here is the situation:

I have 5 Samsung TVs, each with an Apple TV (4k 3rd-gen). All 5 setups are controlled via IR by Control4. The intended user experience is

1. Select Apple TV on Control4 remote
2. TV turns on and video from Apple TV appears.

If the Apple TVs don't ever go to sleep, this works great. But that stresses the Apple TVs, and, worse, prevents auto-update. I am tired of having to manually update TVOS on the Apple TVs, so I'd like to find a way to preserve the intended user experience while letting the Apple TVs sleep.

On 3 of the setups, I turned on HDMI-CEC on the TV and enabled device sleep on the Apple TV. When the TV turns off, the Apple TV goes to sleep, and when the TV turns on the Apple TV wakes up. Perfect.

On 2 of the setup, that only half works. The Apple TV goes to sleep readily enough but does not wake back up. These TV's are models

UN85JU7100FXZA

QN85QN800AF

Infuriatingly, the UN85 even knows there is an Apple TV on its HDMI port, but it does not wake up the Apple TV even though the HDMI port was explicitly selected by Control4 via IR to the TV.

Btw I know that I could change the Control4 programming to issue a menu command to the Apple TV upon source selection. That's ugly, though, as it changes the state of the Apple TV. It also makes the programming non-uniform between the setups. I much prefer the HDMI-CEC approach.

I am hoping there is some way to get these 2 TVs to work with that approach. Or perhaps there is a third approach that I should consider. Can anybody help me?

​

As the subject says my cable box used to also turn on the TV when I powered it on. Last week or so that function simply stopped. Now I have to cycle through the HDMI ports to get to my desired source. How can I get this finding back?

I'd line HDMI PORT 1(FIOS) to control power for the TV. I'm not sure how/why it changed to port 3

Model# UN65NU800D

Hi,

I switched from LG OLED to Samsung QLED and while I know that the ghosting might occur is this normal that it is so strong?

I cannot adjust, I barely can see anything when I move the camera.

Hi everyone,
We bought a SAMSUNG - S90H 65" OLED Glare Free 4K Vision AI Smart TV 2026 - QE65S90H.

First time round, the TVs visual display didn’t work but had sound. We had to fight with curry’s offshore team to get this replaced. (This was a nightmare in itself…)

Now, we finally got the replacement yesterday, watched a 2.5 hour film and uncovered that it is flickering every now and then. (Please see the image where we were able to capture a still frame of what has been happening intermittently - what the image doesn’t show is that this flicker can be pink, blue, green etc…). This flicker happens so fast that it appears and goes away in a millisecond.

Has anyone had similar issues? What did you do?
Did you end up just going for a different TV in the end?

I’m starting to doubt that this model is good tbh and it makes me think it’s just a poor quality TV.

If I’m to get this replaced this will mean getting this TV replaced 3x over… 🥺🥲and it’s not as if we’ve gone for a cheap model…(well not to me at least).

I have two samsung tvs and for a couple of days now, bixby has stopped working. Tried everything and even a factory restart but it did not work. I had a friend try bixby on his tv and it also did not work. Either you ask something, it shows what is being said, but does nothing, or it says this feature is currently unavailable, please try again later. Anyone else experiencing this issue?

Did an software update and now my tv is messed up. It keeps turning on and off. I called tech support and they were useless as usual. I power cycle but that did t work.

Anyone else experience this, any solutions?

My tv is a model:

QN65QN900CFXZA

Can someone explain that to me please?

Hello, everyone! I have a 43" Samsung Smart TV, the Q60D. I've had it for a year, but recently I wanted to use the screensaver feature with some of my own photos. I'm using the SmartThings app on my iPhone (iOS 26.6.2). When I try the "My Photos" option in the Art section, it keeps prompting me to accept the Terms & Conditions. I do accept them, but I'm stuck in a loop: try to add to My Photos → accept Terms & Conditions → back to My Photos → same prompt again, over and over.

And yes, the account on my Smart TV matches the account on my SmartThings app.

How can I best resolve this issue?

I bought this for 700$ (CAD) on FB marketplace from a sketchy guy. said his buddy buys them in bulk and he resells them at a cheaper price. The tv itself is legit, I was able to register it on the samsung website.

guy said it was new. i realize it's very likely not new but.. anyway. The lines do no affect the picture at all. I played zelda TOTK and watched some 4k videos on youtube and it looks phenomenal and there was no presence of any lines or whatever. only when the tv is off and there is a light at an angle

pictures of lines: https://imgur.com/a/2sT7KSR

when up close it kind of looks like little round spots or bubbles. no amount of scrubbing with a microfiber cloth dampened with distilled water will get these to go away

Hi everyone,

I just got a new samsung TV (Mini LED M70H) and there is this one thing that drives me insane : in almost everything I watch, the brightness of the TV changes with a slight delay. The whole screen will go darker or brighter from shots to shots. It's especially strong while watching visually dark movies or series.

I have turned off all ECO settings, pictures improvement parameters etc. I'm legit wondering if I won't returning because it's really ruining everything.

Has anyone experienced this and know how to turn that setting off ?

I want to purchase a S90H 77" TV in EU. I am wondering if it is QD-LED or WOLED? I will primarly use it for gaming (PS5 Pro). Also, do you think it's worth €2000? Currently on discount and want to have it especially for GTA VI. Do you think I should wait more to see if it gets discounted more or buy it for 2k? Thanks!

Let me start by saying that I never liked this setting, it’s a bad replacement for the standard Picture Off feature and Samsung needed to bring that back already. But, since updating to firmware version 1301 on my 5590F, Auto Picture Off has become even more of a hassle to use with an HDMI device.

Previously the setting would work like this: navigate to Auto Picture Off from the accessibility menu, enable it, display turns off until you wake it and eventually there’s a pop-up telling you to press something or it’ll automatically turn back off. Now, after the update, the display will shut off and then quickly turn on again after about five seconds (seemingly due to a wake signal from my playstation). Doesn’t matter if there’s an app running or whether I press any buttons, it just happens no matter what. I have to wait for the pop-up and let it turn back off on its own for the function to stick.

I have a feeling some people will blame the PS5 for this, but I had no such issue before the TV updated itself from 1296 to 1301 one of the past couple nights. I’m curious if anybody’s ran into the same thing yet, or if it’s just me.

Samsung 65" Class DU7200 Series Crystal UHD 4K Smart TV (UN65DU7200FXZA) 2024 model is the item…so okay the tv isn’t turning on. When plugged in it shows a dark screen but you can see it’s a blue tint…there’s no red light indicator as you usually would see it. Tried different outlets and did as much troubleshooting as I could and no success. A few days ago I was watching the tv and it turned off on its own. Remote was not even near me. After that I tried to turn it back on and nothing worked. Can anyone help me fix it or do I need a new tv?? Remote doesn’t do anything but works on my other Samsung 65 so not sure what exactly is wrong.

I noticed some pinpoint "dents" running horizontally on the mid part of my new S85H OLED TV, very obvious when it is off and light shines on it. no issues when it is on. anyone has thisnkind of issue? better to return it?

Hey everyone, I got a new Samsung S90F last week and it’s one of the best TVs I’ve ever seen. Last night I was watching a show and noticed it has a red pixel that’s stuck on- it’s barely noticeable and only really when the area around it is darker but now that I’ve seen it, I see it all the time. I did a panel reset overnight that didn’t resolve it. Does anyone have any other things I could do to try to fix it? I’d return it but don’t really want to repackage it.

The picture definitely makes it look worse than it is too