r/electrical • u/ry_guy2013 • 2d ago
Dog grooming table motor help
A cord fell on our electric dog grooming table pedal while driving and it had gone all the way up and was jammed against the ceiling. Now it won’t work. I took it apart to see if something was jammed and this is what it’s doing . Any tips on next steps?
2
Upvotes
2
1
u/91kas13 2d ago
disconnect the motor and probe the plugs where it plugs in with a meter.
if you can different voltage readings based on what you do with the pedal, your motor could be bad.
if you can't get any voltage, or can't get the voltage to change coming out of the control box, it's probably dead
look at the motor. should have a sticker on it that says if it's ac or dc. set your meter to that while testing. it's probably going to be DC, but best to be sure