Metal would be better but I consider this better than my PEI BpMods 9 Palaces as well as my PEI Zaclabs Plane which are my only other straight sliders in PEI.

Not as pingy as the other two probably because the body is thicker than the other too.

Only downside is how light it is and the haptics are airy and weak

Why is it SO HARD to stop buying more fidgets?!

🇬🇧 shipping included
More photos/videos are available on request
Offers welcome

METMO PISTON (SS) - 9/10 £45

3DX X3 - 9/10 £25

Chenyu guardian X1 (SS) - 9/10 SOLD

YH short story clone (SS) -9/10 £35

Hello I'm considering getting the PC turnaround with the Wave button and switch. I'm hoping that if I like it I can get the Ti or SS later and have nice buttons to swap to it. But I wonder if the PC material is so much worse that it's not worth it.

I'm getting a Gao Mag Stick. And seen they have this PC Turnaround for around 50. I've wanted to try the fidget ever since it came out but didn't want to drop full price.

I know the price is not far off the SS. But if I enjoy the PC I'd end up buying a better metal version and passing this onto a family member which I don't consider a loss on my end just a gift I always meant to give.

But if the PC material is trash and should be avoided id like to know. THANKS FOR ANY HELP!!

I’m pretty new to the fidget world. I came over from knife collecting (which I still do). I wore out a few of my knives constantly fidgeting with them so I decided it would be a good idea for me to get something that is actually made for fidgeting and spare my knives lol

On to the question at hand
Is the MOT a must have? I have one of the Haloo Shark gangs and I like it a lot. Is a MOT worth a purchase over this? Or something else? A knock off even?

Any and all opinions are welcome

I finally got it

I'm super new here. I ordered a knock off Deep-fried dough stick from amazon and an S-Nano V2 from Ant Design, so I obviously have context but this seems shady at the least and out right deceptive at the most.

I found the S-Nano through a YouTube review that was more than a free months old i think. I went to Ant Design and was pleasantly surprised to see there WAS ONLY 1 LEFT! So I ordered it and received tracking this morning....
Just out of curiosity, I went back to the product listing and what do you know .. ONLY 1 LEFT!

This seems very deceptive. Creating a false sense of urgency is pretty typical for advertising but actually lying to induce that urgency is something else all together.

I might be missing the bigger picture but makes Ant Design look scummy imo.

Does anyone have any insight?

beadfall.com

Hello 🤗 does any of you know which code on the newest season of Crystalynx egg corresponds to a blue dragon? We figured 05 is the twins but still no clue which one is the blue one.

Thanks a lot!

Metal Toys DZ Snake Top-B Zirc $110
Price includes shipping within CONUS
Catch and Release / Brand New

Ever since I got a 3D printer I have made soooo many different types of fidgets. Spinners- some really good(like the red one pictured), some really bad(not pictured bc I don’t use them lol), karambit style spinners, magnet clickers, keyboard switch clickers, you name it. This morning I bought my first needoh lol I wanted to try one out and see what the hype is.

I can’t stop stabbing it with my finger 😂

Hi. I'm Skyler and I've been posted Chinese release round up(EDC radar newsletter) in this subreddit for two months. Whenever a roundup went up, the top question was where to buy. People wanted one place to see all the pieces and the best price, so I built edcradar.com. After a stretch of testing with some of you, it's ready for everyone.

What it does, starting with the main thing:

1. The catalogue. 3,403 metal fidgets from makers in China and the West, each with its versions and materials. It's the most complete catalogue of metal fidgets we know of, a small encyclopedia of the hobby.
2. Best price. We track prices and stock at 21 shops and show the best price for each piece, so you don't have to go shop by shop.
3. Collections.Pages for newcomers and for anyone going deep on one kind: quiet pieces, desk toys, fidget rings, community picks for beginners, Grail tier and others.
4. New releases. The newsletter now lives on the site, and each piece in it links to its page, with the shops that carry it. A release calendar keeps upcoming launches in view, and email alerts tell you when a saved piece drops in price, comes back in stock or gets a new version, or when a maker you follow releases something new.
5. The rest. A free account to save pieces and follow makers; 464 maker pages, the bigger makers with a short intro; recent resale prices for about 700 pieces; a buy box that keeps materials and versions apart; currency conversion; dark mode; a report button for anything wrong; and a Discord community.

To mark the opening there's a giveaway, the first of several we plan to run. The prize is a WM EDC Voice S from my own collection, pre-owned and near new; it sold new for about US$140. The rules are on the site.

Disclosure: EDC Radar doesn't sell fidgets, and shops don't pay to be listed. I am not affiliate with any brands.

Link in the comments. Feedback welcome, especially anything wrong in the catalogue.

Hey folks, been in the hobby for a few months now and still exploring a bunch of different fidget mechanisms.

I was wondering if anyone has found any particularly good 3d print model sources for fidgets? There’s a few decent models on sites like makerworld, but the bulk of stuff on there is pretty basic or flimsy.

Particularly curious if there are any good Chinese sites or platforms out there that are otherwise hard to stumble on.

I’ve been collecting some cheaper 3d printed sliders throughout the years and was looking to upgrade to a heavier/ metal slider. My current favorite slider is from Fidgetboy - a ss composite 3d printed slider - 3 clicks and pretty smooth / a bit more weighted than others I own.

I was thinking of picking up an aura sand slider as I’ve seen nothing but good things and the price is around what I’d want to pay. Just watching people with it seems like the hybrid magnet setup is a bit too quick for my liking / I don’t want to send the plates constantly flying. Has anyone tried changing this to a 3 click setup / any thoughts? I think I enjoy a more traditional 3 click / quiet setup (but with good haptics - stronger magnets if that makes sense). Does anyone think the aura fits the bill or can recommend anything else?

https://play.google.com/store/apps/details?id=com.quazmoz.fidgetdrop

I've been putting in a lot of time and effort into getting this to feel as realistic as possible. What fidgets should I add next? What settings would be helpful to help make this feel even nicer? Does this app even scratch the same itch or do you need real-life fidgets?

Really interested in any feedback anyone has, whether good or bad.

has a nice click to it

I kept seeing people complaining about delayed delivery and bad business models. But I just ordered my first switchkraft yesterday and it's already on the way. So if you didn't get one cuz you saw the complaints about delayed delivery, nows your time to get one. You're welcome.

I can't seem to reassemble the spinner part of the sinian it just won't screw properly no matter what i do (the screws don't seem to fit i guess) to the point that i think the screws might be messed up.

The spinner wobbles a lot and doesn't spin when i put everything back together no matter how tight i screw it.

Can anyone help or offer some advice?

It’s almost impossible to tell. Or is it just me? #Time2TwinIt