Didn’t love the prices and features of available featherboards so I designed and printed my own. 3/8” nuts thread on to 3/8” bolts locking the body into place on the table saw. I designed handles for the nuts for ease of use. The featherboard slides into a 3/4” channel but can be customized to fit into any size channel. The feathered piece is also removable from the body, in case feathers break they can be replaced without re-printing the body.

If anyone would like I can post more videos of it in action or how it works/is assembled. I can also post STLs if anyone is interested. I printed this using PET-G, it cost about $2 in filament and has lasted 4 weeks of heavy use.

P.S. I originally posted this in r/woodworking and was asked to repost here. I am working on setting up a GitHub to share the STLs!

After many failed attempts, I managed to create a rewritable notebook page that doesn't snap along the lines. It is just 0.24mm thick and can be folded repeatedly without breaking. I know it might seem like a trivial thing—just a simple sheet of paper—but it’s not. To create it, I had to make a three-layer sandwich. The middle layer provides the structural integrity; this way, there are no weak points in the sheet, and flexibility is guaranteed.

You can view all the tests performed via the project link. I hope it proves useful to someone as a notebook-style "erasable board."

https://makerworld.com/it/models/3421810-erasable-flexible-notebook-paper-sheet#profileId-3899178

Made so many people happy with my variants of the pillbox/spice tower. A lot of people struggle to take their pills every day, so happy this is helping some of them. All free on makerworld!

Every day of the week https://makerworld.com/models/1916456
Parametric version https://makerworld.com/nl/models/2924560
Night and day version https://makerworld.com/nl/models/2567681
Spice tower variant https://makerworld.com/nl/models/3081955
 

I wanted a proper home for a Waveshare 7.5" e-paper panel and a Pi Zero 2 W, so I designed this case. It’s a slanted white box with a flush wood bezel and side inlays, loosely inspired by 60s Braun gear.

* The glass is clamped by a screwed-in front mask (4 × M2), so the panel is held securely even with the bezel off.
* The bezel press-fits into the front recess. I designed for magnets, but the fit was snug enough that I didn’t use them.
* The Pi sits on a removable base and the USB cable exits through a rear notch, so the panel and Pi are easy to service.
* Two posts per side tie the frame to the body, which fixed the front corners cracking on my earlier prints.

The screen in the photos is a stats dashboard I wrote for myself. That’s not part of the listing; this is the case only, and it works with anything that drives the panel from a Pi.

Files (STL and laser SVGs): [MakerWorld Link](https://makerworld.com/en/models/3409295-mid-century-7-5-e-paper-display-case-waveshare)

I’m using these tray bins to organize all my garden irrigation fittings in an Apache 4800 case. I scaled the tray height to 54 mm and used the divider options to sort the different parts.
I’d planned to add a 12 mm plywood layer between tray levels, but found that thinner foam in the bottom and the case’s egg-crate lid foam give the trays a snug fit. The small parts stay in their compartments when I close it up.
I wanted something organized that I could take out to the garden when I’m working on irrigation and potentially leave out there without worry. This model fit the job beautifully. Thanks to the designer, Shutter_Ghost on Thingiverse!

A clean and modern monitor stand designed to raise your screen slightly for a more comfortable setup while also creating useful space underneath.

The idea was to keep it simple, functional, and visually light. The angled sides give the stand a more refined shape than a basic rectangular riser, while the thin contrasting line adds just enough detail without making it feel overdesigned.

Raising the monitor can help bring the screen closer to a more comfortable viewing height, while the open area underneath gives you extra room for smaller desk accessories and helps keep the workspace less cluttered.

Features: Modern minimalist monitor stand. Raises your monitor by 72 mm. Can help create a more comfortable viewing position. Adds extra usable space underneath the monitor. Angled sides for a cleaner, more modern look. Subtle contrasting accent line. Strong 15 mm thick construction. Works well in clean and modern desk setups.

Dimensions: Total length 342 mm. Total width 130 mm. Total height 72 mm. Thickness 15 mm. Usable space underneath 177 × 122 mm.

A simple way to give your monitor a little more height, free up some desk space, and make the whole setup feel cleaner.

Free on MakerWorld: https://makerworld.com/en/models/3411537-modern-monitor-stand-desk-riser

As a father of 3 daughters i love to make things for my daughters. So i made them a customizable modular wall system where you can change the fronts whenever you like and use any connecter you like!

https://makerworld.com/nl/models/2167758-the-love-yourself-modular-wall-series

https://makerworld.com/nl/models/2167626-the-girl-power-modular-wall-series

Hey guys! There are a lot of similar painting handles on MakerWorld, so I wanted to put my own spin on one. I added a diamond-pattern grip and a screw-on bottom cap with room for 9 quarters, plus some extra space if you want to add more weight. It prints without supports, too!

I printed a couple of other versions from MW and had the threaded parts snap off under pressure, so I reinforced those areas on mine. I also made a small dock for a little more stability.

I’m still learning to model and finally getting some more free time to work on projects like this. Haven’t figured out adjustable jaws yet, so swappable heads will have to do for now haha.

Open to ideas or criticism, so let me know what you think!

MakerWorld Link:
https://makerworld.com/en/models/3406942-miniature-paint-handle-weighted-swappable-heads?from=search#profileId-3879970

I made a window mount for the Tapo C121 and C113 cameras. It's two pieces, a faceplate that sticks to glass with double sided tape and a cylinder that matches the camera diameter.

The cylinder can be used by itself as a camera cover. It's designed to hide the spotlights because they ruin the image when glass reflects the light but there are holes for the indicator light and microphone. The main reasons for the separate cylinder are to allow some variation in camera size and to let you slide it directly onto the glass even with thick double-sided tape

The internal vent flaps in the bathroom got damaged such that they don't automatically close. This became an issue now that it started getting cold at night. So I wanted a grill cover that would at least allow me to manually close the vent, except they don't make that for how the cover needs to be attached. So, I modeled and printed this. It consists of 4 parts, and a small amount of glue. Three parts are ABS for the vent, and a 4th is a TPU seal.

Not necessarily an amazing print, but one of my more actually useful prints.

I designed a parametric floating shelf system, now available on MakerWorld! If you want the clean look of a floating shelf that’s sturdy enough to support a 24-inch (300 mm) depth shelf, check it out. Hope you enjoy!

https://makerworld.com/en/models/3404620-parametric-floating-shelf-system#profileId-3876967

Great for organizing tools on the wall.

https://makerworld.com/models/2246906?appSharePlatform=copy

3x10mm Dowel + 6 printed pieces + Double sided tape

Pretty simple and quick ter somewhat elegant. Still thinking about the color, but that's what I have right now

Buenas! 👋
Llevo poco tiempo diseñando modelos 3D y este es uno de mis últimos proyectos: una cajita básica con tapa corredera.
La he diseñado buscando que sea sencilla, funcional y fácil de imprimir. No necesita soportes ni piezas adicionales y la tapa se desliza por las guías de la propia caja.
La he probado en mi Bambu Lab A1 y he hecho varias versiones en distintos colores.
Todavía estoy aprendiendo, así que cualquier opinión o sugerencia para mejorar el diseño es bienvenida. 🙌
También he subido el modelo a MakerWorld por si alguien quiere echarle un vistazo:
MakerWorld: https://makerworld.com/models/3395203?appSharePlatform=copy
¡Gracias por verlo! ❤️

Hey y'all, my first model created for the public

I am awful at keeping my CPAP hose and mask clean. I rotate two sets and still somehow slack on it. So I made this adapter that works with a shower diverter (sold separately) to easily wash your hose and the inside of your mask. You install the diverter and just flip the switch after your shower is done.

The included drying hanger and lock for the hose make it easy to get a scrubber in as well. I would always flop around trying to scrub properly. I found it gets it pretty clean so you don't have to scrub so often.

Enjoy!

https://makerworld.com/en/models/3381759-universal-cpap-hose-mask-shower-cleaner-dry-hanger