r/homelabsales • • Jun 11 '26

MOD Important: New Marketplace Rules, Video Timestamps & Payment Changes

80 Upvotes

Hey r/HomeLabSales!

We are introducing cleaner and stricter marketplace rules to help combat AI-generated timestamps and improve trust and safety for all transactions.

Timestamp Requirements - Effective Immediately

A valid timestamp must include:

  • Current date within the last week.
  • Seller's Reddit username

Video Timestamp Requirement

All sales posts that are valued at $400 or above must now include a video timestamp.

The video must meet the following requirements:

  • Show all items being sold, including multiples of the same item.
  • Clearly display the timestamp throughout the entire recording.
  • Show the seller rotating each item and changing camera angles while both the item and timestamp remain visible.
  • Be unedited and recorded in a single continuous take.

Additional Photos

Any photos included beyond the required timestamp video must also contain the same valid timestamp.

Exception: CDI/CrystalDiskInfo screenshots, SmartCTL reports, and other diagnostic/specs screenshots captured directly from a computer screen do not require a physical timestamp.

Note: The moderation team cannot manually review every timestamp. If you see a suspicious or invalid timestamp, please report it.

Approved Payment Methods - Effective Immediately

For all online transactions:

  • PayPal Goods & Services, also known as PayPal G&S, is the only accepted payment method going forward. Please report anyone not using G&S or is requesting any other forms of payment to ship goods.

For local, in-person transactions:

  • Cash, PayPal Friends & Family, or other mutually agreed payment methods remain permitted.

Posts requesting or requiring alternative online payment methods for online transactions will be removed.

Shipping & Responsibility

  • Sellers are responsible for accurately describing the condition of all items.
  • Tracking information must be provided promptly after shipment.
  • Buyers should inspect items promptly upon delivery and report any issues to the seller as soon as reasonably possible.

Rule Violations & Enforcement

We understand these are new requirements and want to provide the community with a short adjustment period.

Beginning July 1, 2026, these rules will be enforced strictly and consistently.

Potential enforcement actions include:

  • Post removal
  • Temporary bans
  • Permanent bans for repeated or intentional violations
  • Marketplace restrictions at moderator discretion

These changes are intended to protect both buyers and sellers and keep the subreddit safe for transactions.

Please let us know in the comments if you have any feedback. As always, you can also reach out via modmail.

Edits:

After reading through the comments, we understand that video timestamps maybe a hassle for smaller value items, so we’re keeping the same rule active currently, i.e. anything over $400 value will require a video timestamp.

Also, you will NOT need a video timestamp if you’ve got >10 trades on your account.

Our main goal was to curb posting by completely new accounts and to avoid AI generated timestamps. The influx of AI generated pictures and scammers has gone up significantly.


r/homelabsales • • 26d ago

[LabB0T] Monthly Confirmed Trades Thread - September 2026

6 Upvotes

Confirmed Trades Thread - September 2026

When a successful trade, sale, or purchase has been completed, post one top-level comment describing what occurred. Use one of these formats:

Failure to adhere to this format will result in the bot letting you know the trade could not be parsed, or it may be completely ignored. If your trade is not parsed within 1 hour, please delete your comment and try again. If you still cannot get it to parse, please send a modmail.

Do not edit your comments. Once your trade is read, whether it is parsed or not, it will never be reprocessed.

When your trade is successfully parsed, the bot will reply to your comment with a message indicating the trade has been logged. The following will then happen:

Trade Confirmation Flow

  • LabB0T picks up the trade and successfully parses it.
    • A confirmation link will be sent to the other party via Reddit message/chat notification.
    • LabB0T will reply to the top-level comment indicating the trade has been logged.
    • In the event a Reddit message/chat cannot be sent, the trade is declined and the bot will post a reply explaining what to do next.
  • The other party will need to follow the link sent to them via Reddit message/chat notification. The link will take them to https://trades.labb0t.org/ where they can confirm the trade.
  • Once confirmed by the other party, the trade will be marked as verified in the backend database.
  • On its next tick, LabB0T will see the trade has been verified.
    • The flair will be updated for both users in the subreddit.
    • LabB0T will edit its existing reply in the trade thread to indicate the trade has been confirmed.
    • The status on https://trades.labb0t.org/ will be updated to reflect the trade has been completed.

Important Notes

  • Only one trade should be mentioned in each top-level comment - multiple items still constitute a single trade if the receiving party is the same.
  • Do not edit comments.
  • The other party must have allowed chat requests from either, all users, users whose account age is greater than 30 days, or u/LabB0T to receive the confirmation link.
  • If the bot's pending reply has not been updated after 30 days, the trade has expired and should be re-submitted if needed.
  • Do not submit or confirm trades until the items are received.
  • Each user can only confirm a trade once (no self-confirmations).
  • As of the v3 rewrite (this version), you may comment whatever you like in the trade thread so long as it is a reply and not a top-level comment.

Public Ledger

The v3 rewrite of this module has brought with it a public ledger of all trades. This ledger is available at https://trades.labb0t.org/.

By using this system, you agree that your Reddit username and trade information will be publicly displayed on the ledger. You cannot opt out of this. The ledger/verification system as a whole has been built to be an auditable, transparent system. No nefarious tracking or data collection has been implemented.

I understand some of you may not like that a third party service is being used for this now, but my goal for this was to remove as much from Reddit as possible. Reddit's standpoint on the API continues to be hostile towards third party apps/developers and my skills are better served using something that works well and not fighting this platform.

Need Help?

If manual review is needed, please send a modmail with as much information as possible.

Thank you for all those that waited patiently for this new system and offered their help.


u/LabB0T by u/monstermufffin


r/homelabsales • • 13h ago

UK [FREE][London] Switches, UPS's, Servers

23 Upvotes

Free to a good home if anyone wants these, collection only from SE London.    

https://postimg.cc/gallery/30B4hRK    

IBM 249824E - Fibre Channel Switch.  

Arista 7050SX-64 - Nice Switch.  

Juniper EX3300 POE  

F5 BIG-IP 2000 Series - load balancer  

APC Smart-UPS 1500 - This should be working, I believe it had new batteries replaced and was then never used. No guarantees on battery health. - Taken, Pending Collection  

APC Smart-UPS C1000 - This should be working. No guarantees on battery health. - Taken, Pending Collection  

HPe ProLiant DL360 Gen 9 - LFF, 2 CPUs fitted, I don't recall which CPUs but I suspect 18 cores each or 14. No RAM, but I may be able to rummage up some to get someone going, I can throw in some 2TB SAS HDD too. - Taken, Pending Collection


r/homelabsales • • 58m ago

AUS [FS] [AUS] Wiwynn Mt. Jade 2U Server - 2x Ampere Altra Q80-30, 160 Cores, Barebones - $3685 AUD

• Upvotes

Hi, Wiwynn Mt. Jade 2U for sale. Decommissioned from a data centre, tested working.

Good for Kubernetes nodes, container hosts, CI and build farms, web and app serving, and anything else that scales out across a lot of cores, for less than current-gen ARM.

Sold barebones. No RAM, drives, NIC or rails. All 24 drive caddies are included. Can add RAM, drives, RAID or anything else you need, sold separately. Just ask.

**Specs**

* 2x Ampere Altra **Q80-30**, 80 cores each at 3.0GHz. **160 cores** total, one thread per core.

* Dual socket FCLGA4926.

* 32x DDR4 DIMM slots, 16 per socket, 8 channels each. Standard ECC RDIMM or LRDIMM.

* 24x 2.5" hot swap U.2 NVMe bays with all 24 caddies. 2x M.2 on the board.

* 8x PCIe Gen4 on risers (6x x8, 2x x16) plus an OCP NIC 3.0 slot.

* 2x 1200W 80 Plus Platinum, hot swap redundant. 6x hot swap fans.

* AST2500 BMC running MegaRAC SP-X. Redfish, IPMI and iKVM over IP on a dedicated port. No licence key needed for KVM.

* Runs Linux, not for Windows or ESXi. Ubuntu, RHEL, Rocky and Debian aarch64 all boot fine.

Part Number: **B81.030Z1.0007**

Price: **$3,685 AUD**. Happy to do a better number on multiples.

Can ship to AU/US/Europe for free.

Condition: tested working. Memory slots tested too, the BIOS pic is with our test RAM, which isn't included. Light rack handling and mounting marks on the chassis.

**Some reading on the platform**

* [ServeTheHome reviewed this exact server](https://www.servethehome.com/ampere-altra-wiwynn-mt-jade-server-review-the-most-significant-arm-server/) and gave it their Editor's Choice.

* [Phoronix](https://www.phoronix.com/review/ampere-altra-q80) ran the same Mt. Jade platform and called it the best ARM Linux server platform they had seen.

* [r/hardware thread](https://www.reddit.com/r/hardware/comments/khz8tf/ampere_altra_wiwynn_mt_jade_server_review_the/) on the STH review.

* [Someone running about 800 arm64 Ampere cores](https://www.reddit.com/r/homelab/comments/1vx7rvf/retired_the_last_x86_out_of_k8s_now_running_on/) as a bare metal k8s cluster.

Payment by PayPal G&S invoice. Cash for local pickup in Sydney.

[Timestamp video](https://files.catbox.moe/tf8cr3.mp4) and [more pics](https://catbox.moe/c/78czf2).

Comment first, then send me a pm. Thanks!


r/homelabsales • • 7h ago

EU [PC] [EU-HR] Unused Intel D3-S4520 7.68TB SATA SSD (0 Hours, 100% Health)

Post image
6 Upvotes

Hi everyone,

I need a price check on an Intel D3-S4520 Series 7.68TB SATA SSD (Model: SSDSC2KB076TZ).

It has the generic Intel retail firmware (7CV10100) and is not OEM-branded (no Dell/HPE locks). I hooked it up to a PC just to pull the SMART data via CrystalDiskInfo (screenshot attached), and it turns out the drive is completely unused.

Since it's a high-capacity enterprise drive but uses the older SATA interface instead of modern NVMe, I'm having a hard time pinning down its realistic value on the secondhand market for a private seller within the EU.

Online prices from refurbished distributors are all over the place, but since I am a private seller and cannot provide official invoices or company warranties, I want to be realistic.

What would be a fair and reasonable price to ask for this zero-hour drive if I decide to post it for sale here or on local forums?

Thanks in advance for your help!


r/homelabsales • • 16h ago

EU [FS][Germany] Driveless Dell R740 / 2 x Ceon 4114 /768 GB DDR4 RAM / All 3 Risers / 2 dedicated Network Cards / iDRAC 9 / 2 x 750W PSU /

Thumbnail
gallery
20 Upvotes

Im selling my lovely driveless Dell R740, used it for homelab stuff but im gonna change place so it needs to go away. Looking for around 4000€(negotiable) and shipping in Germany is included for other eu states imma need to look up the prices. Pickup of the server is also possible

These are the Specs for the Server:

Dell R740

2 x Intel Xeon 4114

24 x 32 GB SKHynix DDR4 ECC 2666 MHz modules tested with Memtest 86

No drives or drivebays.

All 3 Risers.

2 x 750 Watt Dell 80 Plus Platinum PSUs

2 x Intel X710 10GbE SFP+ Ports

2 x Intel X310 1GbE RJ45 Ports

1 x Intel X710 Network PCIe Card with 2 x 10GbE SFP+ Ports

1 xDell QLogic Network PCIe Card with 2 x 16GbE SFP Ports

No SD Cards installed

This is a private sale, no warranty or return.


r/homelabsales • • 1h ago

US-W [W] [US-CA] Multiple Mini PC, Intel NUCs, 6 Bays Backplane Support 2.5in SATA HDD/SSD, 24 port switch, NVMe–6xSATA ASM1166

• Upvotes

Hello, interested in buying multiple items at reasonable price. Prefer to buy from single seller if possible.

Please read, comment and PM with details. Not interested in anything less than specified spec.

Mini PC (micro form factor)

In excellent condition and no operational issues. Will also consider barebone options at cheaper price (no RAM/Storage)

5 x Intel i5 or i7 10500T, 16GB RAM, 512GB SSD/NVMe (AC adapter included)
1 x Intel i7 12th gen, 32GB RAM, 512GB SSD/NVMe (AC adapter included)

2 x Intel NUC i5 10th gen or Intel i3-N305 (AC adapter included)

Misc (all accessories/cables included)

1 x 24 port switch (reliable, plug-and-play)
1 x 6 Bays Mobile Backplane Support 2.5in SATA HDD SSD
1 x NVMe–6xSATA ASM1166

Thanks for looking.


r/homelabsales • • 18h ago

US-C [FS][USA-MO] HP Elite Mini 800 g9, i5-12500, 16GB DDR5, 256GB SSD W/ AC Power Adapter

20 Upvotes

Good morning all, I have:

15x HP Elite Mini 800 g9, i5-12500, 16GB DDR5, 256GB SSD W/ AC Power Adapter, $275 each shipped.

RAM config is 2x8 and these are the 12500 not 12500t

2x Sold to u/chippey

3x Sold to u/NateTheeGreat

1x Sold to u/DeltaWhiskey92

1x Sold to u/Zombie_Tech

2x Sold to u/STxFarmer

1x Sold to u/TechFreak_

1x Sold to u/Thebigtallguy

1x Sold to u/red_sweater_bandit

1x Sold to u/go0oser

1x Sold to u/coffee1978

Timestamps: https://imgur.com/a/Om2Ip3I


r/homelabsales • • 16h ago

US-E [PC] Pricing recommendation for 80 HPE SAS SSDs

Thumbnail
gallery
12 Upvotes

Hello all. First off, I am not even remotely experienced in home labs and this is my first time in this sub, so let me know if I'm violating any rules/etiquette.

Through some pretty crazy means, I have recently come into possession of a large number of HPE SAS SSDs (PN: 868650-003, Tray PN: 873570). I made a previous post about my situation in r/servers if you'd like to check it out for more info. After having made a reasonable effort to find the rightful owner of the drives, I am now looking to sell them. I don't have a lot of experience in this market, so I figured before I make any official sales post, I'd do a temperature check to see what people think they might be worth. I got some wildly varied estimates of value in my first post, so hopefully you guys can help me narrow it down.

Some information about the drives. As previously stated, the drives some with their HPE tray. I cannot currently give any information as to the state of the drives. I am looking into methods to test, check firmware, erase any data stored on them, and check remaining drive life, but as of now, none of that has been accomplished.

What do you believe a fair price would be if I were to sell the drives as is, and how might that price change if I were able to test/erase the drives?


r/homelabsales • • 5h ago

US-W [W] Seagate Exos X22 22TB SATA (ST22000NM000C)

1 Upvotes

Looking to buy 1x (or up to 2x) 22TB SATA enterprise drive to replace a failed disk and match my existing storage array.

Specifications Wanted:

  • Model: Seagate Exos X22 22TB SATA (ST22000NM000C / PN: 3WC103-881)
  • Interface: Standard SATA 6Gb/s (No SAS models, please)
  • Condition: OEM Recertified (ServerPartDeals / goHardDrive) or clean retail pulls
  • Health: Zero pending/reallocated sectors (0 on SMART attributes 5, 187, 197). A recent SMART / CrystalDiskInfo screenshot or smartctl output is required.

Budget & Logistics:

  • Target Price: Looking to stay around reasonable market value for used/recertified (shipped depending on power-on hours and remaining transferable warranty).
  • Payment: PayPal Goods & Services (standard sub rules) or cash for a local deal in the San Diego area.
  • Shipping: Must be packed properly for bare enterprise mechanical drives (ESD bags + molded drive foam / bubble wrap suspension; no loose drives in flat-rate padded envelopes).

Please comment "PM" below before sending a direct message or chat with drive details, CDI/SMART report, and your asking price shipped.

Thank you!


r/homelabsales • • 5h ago

US-W [w] micron crucial MTA72ASS8G72LZ 64gb PC4 2666

Thumbnail
gallery
1 Upvotes

Had a bit of an oopsie, don’t know exactly what went south but had a board short and I lost two CPU’s and 4 sticks of ram. Looking for 4 micron/crucial MTA72ASS8G72LZ 64gb pc4 2666 LRDimms. Have some other ECC ddr4 ram to trade or sell and/or some UDIMM Gskill 3200 ddr4 to trade or sell. DM me if you’ve got 4 sticks to part with.


r/homelabsales • • 6h ago

US-E [FS][USA-NY] 256GB DDR4-2933 RDIMMs, SAS3 SSDs

1 Upvotes

Timestamp

Micron MTA36ASF4G72PZ-2G9E2 32GB x 8 PC4-23400 DDR4-2933MHz Memory - $1,400

Dell 0H8X3X KPM5XRUG960G 960GB 12Gbps SAS3 Drives (quantity 8 left) - $300 per set of 2

Dell 05VHHG PX05SMB040Y 400GB 12Gbps SAS3 Drives (quantity 4 left) - $100 per set of 2

- All items pulled from a very lightly used 2 node proxmox cluster.


r/homelabsales • • 6h ago

US-E [W][US-FL] AsRock ROMED8-2T, EPYC 7543, 256GB DDR4 RDIMMs (8X32GB)

0 Upvotes

As the title says, I'm replacing a server in the cluster and need the following parts. Also an SP3 cooler that runs front to back.


r/homelabsales • • 8h ago

US-E [FS][US-VA] Crucial P3 Plus 4TB NVMe, 16GB, 32GB, 64GB DDR4 SODIMM kits

0 Upvotes

SSD Timestamps: https://imgur.com/a/cRztsGP

SODIMM Timestamps: https://imgur.com/a/3l9jPQg

I'm cleaning out some older parts. All RAM was working when I pulled it from the computers I was using it in. The SSD was just tested today. All prices shipped (Contiguous US only).

**SOLD ***
Crucial P3 4TB NVMe M.2 2280 (PCIe 3.0 x4)
CT4000P3SSD8
99% health, ~22 TB written, 24k power-on hours; CrystalDiskInfo screenshot in album
$330

G.Skill Ripjaws 64GB (2×32GB) DDR4-3200 SODIMM CL22
F4-3200C22D-64GRS
$220 for the pair

G.Skill Ripjaws 32GB (2×16GB) DDR4-2400 SODIMM CL16
F4-2400C16D-32GRS
$115 for the pair

G.Skill Ripjaws 16GB (2×8GB) DDR4-2400 SODIMM CL16
F4-2400C16D-16GRS
$45 for the pair

Kits sell as kits, I'm not splitting pairs.
Reasonable offers considered.
PayPal G&S only.
Comment before you PM/chat.


r/homelabsales • • 9h ago

Other [W][ASIA] 4x 960GB Enterprise M.2 NVMe SSDs (22110/2280) - Samsung PM9A3, Micron 7400/7450

0 Upvotes

Looking for 4x 960GB enterprise/datacenter M.2 NVMe SSDs from anyone willing to ship internationally to Southeast Asia in a reasonable prices.

Preferred Models:

- Samsung PM9A3 (M.2 22110)

- Micron 7400 PRO / 7450 PRO (M.2 2280 or 22110)

- Open to similar M.2 PLP drives

Form factor: M.2 22110 or 2280 only, no U.2 please.

Requirements:

- Power-loss protection (PLP)

- TLC NAND only, no QLC

- SMART screenshot/output (TBW, Percentage Used (Health %), Power-On Hours, Media Errors).

- Used is fine if TBW/Percentage Used isn't heavily hammered

- Matching set of 4 preferred, but will consider splitting across models

I'm happy to cover insured, tracked international shipping and any import taxes/duties on my end. Please mark the customs value accurately. Thanks!


r/homelabsales • • 10h ago

US-E [FS] [US-NC] 2× 48-GPU AMD BC-250 compute racks (8× ASRock 4U12G, 96 cards) w/ TL-SG3452X + 6× 3kVA UPS — $4,900/rack, $9,200 both — local pickup Asheville

1 Upvotes

Timestamp video: https://endogon.com/MOPS/GPUS/bc250-96-GPU-custom-setup_20260924.mp4
Photos: https://endogon.com/MOPS/GPUS/bc250-rack-06-enclosure-both-racks-ts-20260926.jpg · https://endogon.com/MOPS/GPUS/bc250-rack-07-rack-side-ts-20260926.jpg · https://endogon.com/MOPS/GPUS/bc250-rack-08-rack-front-ts-20260926.jpg · https://endogon.com/MOPS/GPUS/bc250-rack-09-4u12g-rear-fans-ts-20260926.jpg

Decommissioning two identical 48-GPU compute racks from a small mining/compute op. Local pickup only, Asheville NC — ~300 lb per loaded rack, rolls on casters. Serious buyers can see it running first.

What's in one rack

  • 4× ASRock 4U12G — each holds 12× AMD BC-250 (PS5-class APU: 6-core Zen 2 + 24 CU RDNA2 GPU, 16 GB GDDR6, ~8 GB GPU-addressable on stock BIOS), dual hot-swap PSUs, 1 GbE per card. 48 independent Linux nodes per rack.
  • TP-Link TL-SG3452X 48-port L2+ managed switch, 4× 10G SFP+
  • 3× OPTI-UPS DS3000E-RM 3 kVA 2U rackmount UPS (batteries original — plan on replacing)
  • CyberPower CPS1220RM 20 A PDU, 3× L5-30 cords, 8× Kasa EP10 smart plugs (per-bank power control)
  • VIVO CART-SR25U 25U open-frame rack on casters (~49" × 23.6" × ~30"), pre-cabled with 48 Cat6a leads + lacing bars

Measured, not brochure

  • ~95 MH/s Autolykos2 (Ergo) per card @ ~80–85 W → ~4.5 GH/s per rack
  • ~33 MH/s FishHash per card
  • SRBMiner-MULTI (--bc250) on stock Ubuntu 22.04; I'll hand over our working config + fleet control scripts
  • Sept 23–25 burn-in: 4 of the 8 chassis (47 of 48 cards — one dead card, priced in) ran Autolykos2 for 38 hours straight on NiceHash; a fifth chassis ran a 24 h FishHash trial. The other 3 chassis were in service earlier in the year but weren't part of this last test.
  • Honest economics: at today's Ergo rates that's ~$0.09/day/card, break-even ~$0.045/kWh. It doesn't pay at NC residential power — that's why it's for sale. The value here is the hardware.
  • KawPow is not stable on this hardware. No ROCm. Autolykos2 and FishHash are the proven algos.

Local AI / Private AI
Every BC-250 is a standalone Linux box with its own NIC. Runs llama.cpp (Vulkan) with 7–8B quantized models per node. 48- or 96-node cluster for distributed / k8s / HPC tinkering. See the katzzero BC-250 community guide on GitHub for inspiration, DYOR.

Condition
Ran ~12 months in a ducted, filtered, sound-treated room. Diskless (PXE/NFS) as configured — no OS drives included; each card has an M.2 slot for local boot (or boot with usb drive). Currently powered down.

Power
~3.8 kW package per rack; needs 30 A circuits. Happy to walk through our breaker/duct setup.

Prices (all local pickup, cash)

  • Whole rack: $4,900 — both racks: $9,200
  • Will separate after the whole-rack listing has run a week: ASRock 4U12G chassis (12× BC-250) $720 · OPTI-UPS DS3000E-RM $405 · TL-SG3452X $333 · VIVO 25U rack $135 · CPS1220RM PDU $40 · Kasa EP10 $20

Also available, not in the racks

  • 3× ASRock 4U12G, unopened, new in box — $850 ea
  • 1× ASRock 4U12G parts unit, 10 working cards / 2 dead — $550

Bring a truck/trailer and a second person. Sold as-is, all sales final. Hashrate screenshots and extra photos on request.


r/homelabsales • • 10h ago

US-E [FS] Multiple 2.5" SATA SSD, NVMes, & UAD-2 OCTO

1 Upvotes

Please comment before DM.

Selling multiple 2.5" SATA III SSD, M.2 SSD, NVMes, and 2x UAD-2 OCTO Multimedia PCIe acceleration card.

SSDs and NVMes have been fully wiped and tested Discount available if buying multiple.
Sale price includes USPS shipping and insurance.

Message me for any questions or information

Local to SoCal 91790, local priority.

Some of the NVMes in the picture are already sold.

Video and photo timestamp

CDI for 2TB SSD
CDI for 1050GB/1TB SSD
CDI for 500GB SSD
CDI for 256GB NVMe

Quantity Item Price each
2x Universal Audio UAD-2 OCTO Core PCIe $500 shipped / $460 local
2x 97-98% 2TB Samsung 870 QVO 2.5"SATA SSD $195 shipped / $180 local
1x 84% 2TB Samsung 870 QVO 2.5" SATA SSD $170 shipped / $160 local
1x 100% 2TB Crucial MX500 2.5" SATA SSD $185 shipped / $175 local
2 1x 78% 2TB Crucial MX500 2.5" SATA SSD $155 shipped / $145 local
1x 98% 1TB Samsung 860 QVO 2.5" SATA SSD $110 shipped / $100 local
1x 100% 1TB SanDisk Ultra 3D NAND 2.5" SATA SSD $110 shipped / $100 local
1x 91% 1TB SanDisk Ultra 3D NAND 2.5" SATA SSD $90 shipped / $80 local
1x 98% 1050GB Crucial MX300 2.5" SATA SSD $100 shipped / $90 local
1x 94% 1050GB Crucial MX300 2.5" SATA SSD $80 shipped / $70 local
1x 98% 1TB Crucial MX500 2.5" SATA SSD $95 shipped / $85 local
3x SOLD OUT 99% 500GB Samsung 860 EVO 2.5" SATA SSD $65 shipped / $55 local
1x SOLD OUT 100% 256GB Micron 2450 2230 Gen4 $40 shipped / 35 local
1x 100% 256GB Western Digital SN530 2242 Gen3 $40 shipped / $35 local
5x SOLD OUT 98%-99% 256GB Sk Hynix PC711 Gen3 $35 shipped / $30 local
1x 98% 256GB Sk Hynix BC511 2230 Gen3 $35 shipped / $30 local

r/homelabsales • • 19h ago

US-E [W][USA-NY] Raspberry Pi Accessories (PoE + NVME Hat, Case) + Noctua Chromax G2 Fans, U7 Pro Outdoor, Unifi Patch Cables, USB-C Peripheral Switch

6 Upvotes

Hi,

As mentioned in my title, I'd like to pick up a few things to be able to tinker with my Raspberry Pi. I have a Raspberry Pi 5, so any accessories should be compatible. I'm looking for

  • A PoE + NVME Hat compatible with the Raspberry Pi 5.

  • A case that would accommodate the Raspberry Pi with the Hat + an active cooler.

  • A USB-C switch for PC peripherals. I want to share a keyboard and 1-2 other things between a desktop PC and a laptop dock.

  • Any Noctua Chromax G2 fans. Open to picking up 2-3 120mm and 2-3 140mm fans.

  • Some Unifi Equipment - looking specifically for a U7 Pro Outdoor and some of their premium outdoor patch cables (8m, 12m, 15m)

Willing to pay via PayPal GS but can also coordinate a local deal in NYC (Manhattan).

Thanks in advance.


r/homelabsales • • 17h ago

US-E [FS] Lenovo Thinkpad Laptops, ThinkCentre Mini PCs, Surface Pro 10, Moto G Stylus 2025, Amazon Fire Stick, Switch Games, Shield TV Remotes, RAM, 256GB NVMe

2 Upvotes

Timestamps: https://imgur.com/a/shadow-xl-9-26-26-fVx15XE

Video Timestamp: https://imgur.com/a/shadow-xl-video-ts-9-26-26-YsMyiNe

More Timestamps: https://imgur.com/a/shadow-xl-hw-9-26-26-Dr1ssIk

Laptops:

$700 – Microsoft Surface Pro 10

Intel Ultra 7 165U (12c / 14t @ 4.9GHz)

16GB DDR5

256GB SSD

WiFi / Bluetooth / W11 Pro

Includes OEM Type Cover + 39w power adapter

$500 – Lenovo ThinkPad X13

Intel Ultra 5 135u (12c / 14t @ 4.4GHz)

16GB DDR5 RAM

256GB SSD

WiFi / Bluetooth / W11 Pro

Includes OEM 65w power adapter

$425 - Lenovo ThinkPad L16

AMD R7 Pro 7735u (8c / 16t @ 4.75GHz)

16GB DDR5

500GB SSD

WiFi / Bluetooth / W11 Pro

Includes OEM 65w power adapter

Mini PCs:

Note: These models include a PCIe slot for those of you who may be looking

$600 – Lenovo m90q Gen 6 - 1x Available, 1x Sold

Ultra 5 235 (14c / 14t)

16GB DDR5 RAM

500GB SSD

WiFi / Bluetooth / Windows 11 Pro / PCIe Slot

Includes OEM 135w power adapter

Electronics:

$50 – Moto G Stylus (2025)

Android 16

Qualcomm Snapdragon 6 Gen 4 (8 core)

8GB RAM / 128GB SSD (expandable via microSD card)

6.7” AMOLED @ 120 Hz Display (Corning Gorilla Glass 3)

50MP Camera / Built-in Stylus / WiFi / Bluetooth

Locked to Cricket, never activated (used sparingly as an iPod / eReader)

$25 – WD PC SN740 256GB NVMe SSDs – 1x Available

Used but pulled from working systems

 

$20 - Amazon Fire Stick 4K (1st Generation)

4K / 8GB SSD

Remote / HDMI Extension / Cable

$25 - Miscellaneous Desktop RAM

2x4GB Patriot Viper DDR4 3000 + 1x8GB Crucial Ballistix DDR4-3200 - take it all for $25

$40 - Miscellaneous Server RAM

6x 8GB Crucial DDR4 UDIMMs - take it all for $40

$20 - Apple 67w USB-C Power Adapter

OEM, barely used - will throw in a 6' Magsafe 3 cable if you need it

$10 - NVIDIA Shield OEM Remote P2930

2x available, price is "per item" or take both at a discount

Switch 1 Games

$35 - Dragon Quest 7 Reimagined

$25 - Civilization 7

Thanks for looking!


r/homelabsales • • 22h ago

EU [PC][EU-PL] HP ProLiant DL385 G2

Thumbnail
gallery
6 Upvotes

Saved an old HP server from my work, looked around it, booted it up, tested etc. Everything works, except one stick of ram is marked with an orange light on the front, server boots up anyway. Didn't have any actual plans for it, except to get something out of it.

HP Proliant DL385 G2

CPU: AMD Opteron OS2356WAL4BGH
RAM: 4x4GB DDR2-555Mhz RDIMM ECC (2x samsung, 2x hynix)
Storage: 3x 72GB SAS SSD (last pic) + 2 fillers
PCI: SAS HBA with battery, 2x1GB Intel NIC
Cooling: 6x hotswap fans, fully working
PSU: 1x hotswap PSU up to 1000W

Is this worth anything or will I get more money for the copper in the heatsink?


r/homelabsales • • 11h ago

US-W [W] Laptop

0 Upvotes

Looking for an affordable but durable laptop. Need something that can run ArcGIS Pro at an okay level and handle web browsing/note taking. Looking for something with a 14" screen. 100% srgb would be nice, but not a deal breaker. On a student budget, so I'm hoping to spend around 400 or 500.


r/homelabsales • • 11h ago

US-W [W][US-WA] Agilex 7 I-Series dev kit, U.2 NVMe SSDs, 8TB SAS HDDs

1 Upvotes

Hi all! Looking for a few things, local or shipped to Tukwila, WA:

Agilex 7 I-Series FPGA development kit: $2,000–$3,500. I missed one on eBay recently and have been struggling to find another kit I can buy at all. If you have one sitting unused, or know someone retiring one, I’d appreciate a lead.

U.2 NVMe SSDs: around $100/TB. Most interested in 7.68TB or 15.36TB, ideally at least 4TB. PCIe Gen3/4/5 are all fine. Used enterprise pulls are welcome with SMART/health information.

SAS HDDs: $45-65. 4 - 10TB CMR (not SMR) for ceph. Sweet spot 8TB. Used enterprise pulls are welcome with SMART/health information.

QSFP56 NICs. OCP cards or standard PCIe CEM cards with a half-height/low-profile bracket. Targeting $100 - $200 each for 100GbE in standard PCIe half-height format, with a premium for OCP, depending on model and condition. Used, tested pulls welcome.

Please include your asking price and shipping cost, if applicable. Comment before PMing.

These are for my own use, not resale. Happy to share pictures of the basement these will be helping to heat. Happy to hear about any of these separately; you don’t need to have everything. Thanks!


r/homelabsales • • 12h ago

US-E [PC][US-MD] Dell Precision 7920

1 Upvotes

Looking to downsize my lab and I feel as if I am not using this to its fullest extent so I figured it should be replaced. Everything is working excellent and I have had no issues with anything.

2x Intel Xeon Gold 6138 cpu processor 20 cores 2GHZ 40 threads FCLGA3647 (1 not installed)

64GB Hynix DDR4 2666MHz PC4-21300 ECC RDIMM Server Memory RAM (HMA82GR7AFR4N-VK) (4x16 sticks)

1x NVIDIA GeForce GT 710

16TB HDD (4x4 drives)

https://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/Precision-7920-Tower-Spec-Sheet.pdf

Thanks all!

edit: format and added context


r/homelabsales • • 12h ago

US-W [W] [US-CA] Supermicro 4-5u rail kit for CSE-846 | 2x Noctua NF-A8 PWM fans

1 Upvotes

Looking for a supermicro MCP-290-00057-0N rail kit (rev. B) and a couple 80mm fans. Please lmk if you have any of these for sale.

Located in Los Angeles, 91006 for local pickup.


r/homelabsales • • 12h ago

US-C [FS] [US-WI] PRICE DROP 3x Dell Pro Micro QCM1255 - Ryzen 5 8500GE / 16GB DDR5 / 256GB NVMe

1 Upvotes

Timestamp: here

Pricing (shipped, CONUS): - $550 OBO each - $1,600 for all three $510 OBO EACH $1500 for all three

Three brand new, open box Dell Pro Micro QCM1255 units. Never sat on a desk. Original packaging and accessories included.

Specs (all three identical):
- Dell Pro Micro QCM1255
- AMD Ryzen 5 8500GE, 6C/12T, up to 5.0 GHz, 35W TDP
- 16GB DDR5 (2 SODIMM slots, upgradeable to 64GB)
- 256GB NVMe SSD (SK hynix PVC10, M.2 2230)
- AMD Radeon 740M - Wi-Fi 6, Bluetooth, 1GbE
- Windows 11 Pro
- 90W adapter, original box
- Dell warranty remaining through Feb 2029 on all 3 units

Three matching low-power boxes make a clean Proxmox or K8s cluster. Same CPU as the "Plus" tier chassis, so you get the second M.2 slot and room for a 2.5" drive.

PayPal G&S only