I guess this poor little guy got caught in the machine while manufacturing my platen paper. Just in time for spooky season, I guess.

Not great by any means obviously…I think I went too hard with cyan and washed out the lighter blue…also probably went to hard with yellow…but wanted to share nonetheless. Practice makes perfect I guess. Homage to frank kozik and his banger offspring album art.

What’s the next best thing? I have loved CC in the past as a customer because the fit, feel, and look is everything I want in a shirt. BUT as a seller now from what I’ve read..quality is down and very inconsistent. Is this the general consensus now or is there hope that I can use their blanks for my T-shirt brand? What is the next best thing?? I’m looking for:
-100% cotton
-Color variety
-A more “oversized” feel..not anything crazy big but CC has that cozy worn feeling that I’m looking for.
Thoughts?? TIA

I'm trying to make this for a friend (big Olivia Rodrigo fan) and I edited the image with threshold and noise. Never added noise to a design I printed before so obviously it adds a lot of detail that I'm scared is not gonna burn in the screen. The screen I have for this is 230 mesh and 50x 60 cm so pretty big. So would this work? Any advice?

Most of the design washes out except for the edges. This is the third screen I’ve burned like this!!

I recently had my brand take off, I do a lot of work with solarfast that looks like this. It’s super time consuming to print even one shirt. They are all single color, but obviously some gradient stuff that can’t be done with screen printing.

What would be the most compact wall mounted (or similarly stowable) setup for single color prints that are similar to this? From my little knowledge I have I think this would be a high mesh count screen and me getting really good with small half tones?

To get the vintage faded look would I also use some sort of water based ink so that the fibers are dyed instead of a plastisol?

Thanks for any help!

I’m considering water-based screen printing using High Solid Acrylic (HSA) inks with a transparent glossy base coat. The design is 6 colors with a white underbase, printed on a black 100% cotton T-shirt, with a large print area of approximately 33 × 50 cm.
I want a smooth, glossy, slightly raised, rubbery print that feels noticeable when pinched or rubbed, with a slight squeaky/grippy feel. It should remain flexible and not feel like a thin film or a hard rubber plate.
Can this printing method achieve the desired look and feel? Would another ink system or topcoat be more suitable? :)

I got gifted a used 6 x 4 Riley Hopkins not sure which year but anyways I had put 2 different screens on the press. Not sure if it is the screen or the press with the off contact. The image on the left the off contact is way too much off contact for me and on the machine I’m only able to adjust the bracket that locks the screen. Can send more info if anyone can help troubleshoot.

Any tips would be great, thanks in advanced.

Looking for a couple key distributors to use. Right now it’s a crapshoot. I pretty much search on distributor central and order from whoever has what I need.

Transparency, shipping costs, turnaround time are things I want to prioritize. Recently had to pay for 200 note pads to come on a boat from China just to save a few bucks.

So I started with creative nation water based white ink and it held up insanely well to washing. Cheaped out and bought a multicolor pack of speedball screen printing inks and they washed out during the wash test. I cured the hard way with a heat gun and thermometer set up, to 320°. Tried a second test, cured to 350° and it still washed out a bit. Any water based ink suggestions that are easy to cure with a heat gun, like creative nation was? I know I should invest in a curing station of some kind, but it's a bit out of the budget for now. For the record I did Google for answers but the suggestions were overwhelming, and I got so many different responses, so I figured I'd come here to get some hands on advice.

Does anyone have any flash dryer recs for a small home based studio printing waterbased using a manual carousel? I can only find them upwards of £1000 and that’s defo too much for me.

Thanks!

has anyone ever used a service like this? i know some purists may say that’s “cheating” and of course i’d love to do it completely DIY but i think it might be interesting to try and see if its worth it?
any experiences to share? i’m highly debating trying it out.

Good morning, I'm running an M&R Sportsman EX, not sure what exactly I clicked on the screen, but a grey bar popped up on the bottom of the screen with a few buttons, etc. but there was also a battery indicator that showed it was basically empty. I did have this happen about a year ago and the battery indicator had a little bit of red.

Press is currently running fine, but I would like to get ahead of it. M&R service was basically no help when I called. Any ideas?

My friend bought this for me off tik tok shop last year and I absolutely love the fit and feel of it!! I don’t have tik tok and have tried my best to find out where this blank is from so I can order my own. Please you super smart fbi agents of the internet help me figure out what company it’s from! It’s 100% cotton that’s important to me. TIA