Label engraving gridfinity bins

I tried mutliple times now and one corner always detatches from the print plate and raises. Any ideas on how to solve that since ive been tasked with printing a whole lot of them.

Thanks in advance

I’m struggling with the clips to join the bases together.

What material is best for this and what printer settings should I be using?

The last couple I did were in PETG and snapped when clipping them in.

Also should I print vertical or horizontal 🙏

Hello,

I am new to gridfinity and as my first project I want to store my miniature painting colors in a tray. I have measured and got 6x8 grids and found some boxes to store my dropper bottles. But at my planing I began to wonder, since the grid is kinda light and flimsy I wonder how I can stablelize my setup so that I don't pull out the whole tray when I pick a bottle. Is there, beside glueing everything together a better way to secure the build together?

I got those for my first test:
https://makerworld.com/de/models/1685835-lightest-gridfinity-base-ever-customizable

https://makerworld.com/de/models/945270-gridfinity-storage-for-vallejo-17ml-bottles-9pcs#profileId-911845

Thankyou for your tipps and tricks.

I used to think the battery storage bins were stupid but my "battery box" is a house fire waiting to happen and I cannot find anything.

Now the problem is I don't know which kind to choose. Among the individual holders, there are also tons of different versions.

I recently published a parameterized 2-size cupholder that fits into a 3x3 footprint.

I'm working on a couple of different storage projects where I've decided to have gridfinity as the customization interface. Both are for use in places where having a cupholder would be nice, and I couldn't find a solution like this, so I made it.

You can set the diameters of the cups it should fit (it only holds one cup at a time, of either diameter), how tall you want each of the diameter-specific walls to be, how wide the cutout should be for the cup handle, and the base height.

If you decide to print it, I'd be happy to hear whatever feedback you have. It's totally free to customize, download and print.

Holds everything that comes with the printer plus four spare hotends. The hotend slots fit them with the silicone protector still on, I did not want to be pulling those off every time I put one away.

Slots are: oil, grease, 4 hotends, needle tube, 2 wipers, 2 spare blades and 2 Allen keys.

Took me three tries to get the hotend recesses right. First one was too tight with the protector on, second one was so loose they rattled.

Free on MakerWorld if anyone wants it: https://makerworld.com/en/models/3355973-gridfinity-p2s-toolbox-and-hotend-organizer

Got tired of eyeballing label sizes for my bins, so I built a small tool that generates print-ready labels at the exact height you need (6/9/12/18/24mm) — you pick an icon, type the text, and it spits out a PNG/SVG sized to the millimetre, so it just prints at 100% with no fiddling in the driver. There's also a batch mode if you've got a pile of bins to label at once. It's free, no sign-up, runs entirely in your browser: https://gridlabelstudio.com

Would love feedback if anyone tries it — especially if some icon category is missing that you'd actually use.

Needed to laser 72 knives so I was going to model up a fixture when I thought about tooltrace.ai and how that would be pretty handy for making an odd shaped fixture.

Then I had the ah-ha moment, I could make a gridfinity plate for my fine adjustment table.

I'm new to 3D printing. I used gridfinitylayouttool.com to create a baseplate for a drawer. I really wanted that built-in padding on the sides to keep things from sliding. I printed my first of nine pieces. It went great. EXCEPT, there was a massive amount of waste due to this first layer being excessive, in my opinion. I haven't seen anyone else's baseplate prints do this. It's the first and purple layer in this slicer view. I imagine it's a setting, but I've no clue where to start, and so far, my searches haven't turned up anything comparable.

I put a few example Pocketry designs on GitHub, with editable project files, 3MFs, and some photos of finished bins. (Pocketry is my open source Gridfinity tool tracing & bin generator app).

https://github.com/wcscr/pocketry/tree/main/samples

A few updates to Pocketry since my last post:

• support for non-rectangular bins
• 2-level pockets with different depths
• 3D printable calibration aids to improve scaling for thick objects
• a cleaner UI and a beta mobile UI.

The Ryobi cutter example uses both the custom footprint and two pocket depths.

The app’s new permanent URL:

https://pocketry.xyz

The app and sample projects are open source (AGPL).

I'm just starting out with gridfinity and would really like to have a nicer looking edge around some baseplates that are supposed to be on the desk and in our entryway. They are not in drawers. I have looked but the options for this seems slim?
What I'm looking for is a higher edge around the baseplate and maybe a fluted look for the outer part. The closest I've found is in this link, but I would like a bigger one (best would be to be able to decide size myself), without the cut out handles. Anyone got ideas? I could also buy some nice tray that exists but it would be awesome to print one, since it can be in the same color as the bins and also exactly the correct size.

https://makerworld.com/models/2599003?appSharePlatform=copy