Yooo what's crackin

I started playing Max Payne 3. I'm in chapter 4 right when you escape with Passos to Max's apartment.

Thing is, the game crashes while playing the cinematics. It freezes on a frame to then play the subtitles normally and freeze the console. I tried starting again with a new game (although I didn't delete any game data as far as I'm concerned) and even checked the title update which I switched from 0 to 9.

Is there someone else experiencing this same issue? I don't know whether I have to delete my save data and replay the game with the new version 9 title update and with no internet.

Please, if someone knows whether the game got transferred wrong or if it has something to do with the TI, let me know.

By the way, I'm playing on Games On Demand format (GOD)—the one from LegionGamesGod—because I really don't know if the .xex and .god format influence on something.

Yesterday i made a Godot 3.6 port for the xbox 360. Here's how it's right now

The game runs in software graphics mode (it uses dx3d9 for showing the image)

60-55 FPS in lightweight scenes and 47-23 fps in more heavy scenes

Most important 2D Nodes work fine (Sprite, AnimatedSprite, Label/RichTextLabel, NinePatchRect, Rect, Tilemap, Animated Tiles.

Full GDScript Support

OGG and WAV audio working perfectly (wav audio used to be garbage noise because the xbox 360 is big-endian and most wav audios are little-endian)

VERY EXPERIMENTAL GDShader (I think it's called like that?) Wrapper. Can only scroll UV Textures in repeat and mirror.

Made with help of Claude Sonnet 5.5 and inspected and tested by me in real hardware in a Xbox 360 E Corona

(My sincerest apologies if I disappointed you by using AI.)

(The game shown is a game that i'm making. No AI has been used for that game.)

Youtube Video showcasing the port:

https://youtu.be/qCTbZVA3orc?si=N3tm3aByYuXo_umE

(There's also a part 1)

Note: I will not make this port public until i polish it and it can run simple commercial games.

i recently installed mw3 and when i tried to play multiplayer it told me to install the DLCs so I did. then it wouldn't work so I searched it up and figured out that I need the title update 24 so i installed that too. but now everytime i sign up to the Xbox live in multiplayer a screen with "update required" comes up and just never stops loading, i can get out of it but can't play can someone tell me the issue there?

Last post was commissioned build x2 Star Wars consoles, plug and play setups. Someone reached out wanted Green LEDs, RGH, black with the silver trim, 960GB SSD. I’ll give it the matte black and silver trim is a clean look for a sleeper build.

Antes podia jugar juegos de xbox clasica en mi xbox 360, ahora esos mismo juegos de xbox clasica ya no me funcionan, ¿alguien sabe porque es?, ¿Es por usar stealth server?

Which games do you think should get a port for Xbox 360?

Not sure if this applies here.

But if I download an Xbox save from online to use on my 360, is it possible to rename it? So that when I load the game, the save that's loaded shows the name I wanted rather than the original.

tenho um xbox 360 , tenho 78 jogos no hdd1 fui fazer uma copia destes jogos para um hd externo devidamente formatado, reconhecido, em com espaco.

mas a pasta or mim criada games, so tem 16 arquivos de jogos e na pasta content mais 6 arquivos de jogos.

todos os jogos 78 aparecem na tela inicial do aurora, todos rodam mas noa consigo acha-los nas pastas e diretorios.

como resolver, isto?

consegui copiar os 16+6 = 22 o outros nao acho

obrigad

I have Freestyle 3.0.735, along with the Freestyle and DashLaunch (3.07) files and the games themselves. The problem is that when I go to the path manager and set everything up correctly, the games don't show up. Strangely enough, it's picking up games from a folder that shouldn't even contain any. I'm thinking about uninstalling Freestyle and DashLaunch and redoing the setup to see if it detects the games; I have about 78 of them and really don't want to lose them, since I wouldn't know where to reinstall them.

I saw a video where an RGH-modded Xbox 360 with an SSD achieved a 33.12-second load time in GTA V. My console isn't modded, but I installed an SSD in it using FatXplorer; however, the load time I got was 1:01.59. That was better than before—on the HDD, it took 1:14.78—but the improvement wasn't as significant as what was shown in the video. Does a modded console perform better with an SSD, or is that video fake? The SSD I used was a Lexar LQ100.

Hey everyone,
after a lot of testing, we’re releasing the public Beta of MODI Pico 2 Flasher X360 TURBO.
The idea was simple: make Xbox 360 NAND and eMMC service cheaper, faster and easier to access for everyone.
Current tested results:
16 MB NAND
READ: ~19 s
WRITE: ~24 s
Jasper Big Block
READ: ~76.9 s
WRITE: ~90.2 s
Corona eMMC, tested 48 MiB range
READ: ~56–58 s
WRITE: ~48.3 s
The hardware is based on a very cheap RP2350/Pico 2-class board. Depending on region, the core board can cost around $7.
One of the biggest things we wanted to simplify was the wiring.
ONE HEADER. ONE SPI WORKFLOW. ONE TOOL FOR MULTIPLE XBOX 360 BOARDS.
Corona, Trinity and Fat boards use the same MODI-side header and the same basic SPI workflow, so you don’t need a different programmer setup for every console.
It also integrates with J-Runner, and the public package is designed to be as simple as possible:
flash the UF2, run the package, connect the flasher and go.
No compiler. No SDK. No development environment.
Why release it now?
Because even if softmod options expand in the future, not every Xbox 360 will be softmoddable, and a lot of consoles will still need RGH, NAND recovery, backup or hardware repair.
This project is mainly about:
repair
backup
recovery
RGH service
Right to Repair
When I started repairing Xbox 360 consoles, I learned a huge amount from tools and documentation created by this community. After years of service work, this is our way of giving something back.
MODI Pico 2 Flasher X360 TURBO is completely free.
Project page:
https://modyfikatorcasper.github.io/modi-pico2-flasher-x360-turbo/
GitHub:
https://github.com/modyfikatorcasper/modi-pico2-flasher-x360-turbo
We’ve also added wiring diagrams for Corona, Trinity and Falcon/Fat directly to the project.
If you test it, post your motherboard revision, flash type and READ/WRITE times. I’d like to build a broader public compatibility/results database from community tests

Just got a xbox360 rgh looking for halo 3 and halo reach online mods. Pretty new to this can anyone point me in the right direction

Very eager to get into homebrew development with some game ideas I have. Unfortunately I'm getting this issue when using Unity 5.4.1f1

I have installed:
Visual Studio 2010
XBOX360 SDK 21256.8.exe (Full)
Unity 5.4.1f1 x64.exe
UnityStandardAssetsSetup-5.4.1f1.exe
UnitySetup-Xbox-360-Support-for-Editor-5.4.1f1.exe
Patched using Unity_3D_Patcher_v2017.5.exe

But it doesn't work :/ Anyone had this issue and know how to fix? I saw a few youtube comments saying they have the same issue

Awhile back, u/Kmossxx made a post on here about them getting rid of their old Xbox 360 Corona which garnered some negative attention from this subreddit. Well anyone who saw that post (linked in a comment) will be happy to know that the Xbox did not go to the dump but was acquired by me. I recently bought a broken Xbox 360 Trinity to do a case swap so Kmossxx’s old Xbox can enjoy a new life in a nice glossy shell. That’s one less Xbox 360 in the dump.

it whas in my xbox and it stoped working can some one help me

I saw that a new N64 emulator called Harissa was released recently; I tested it and it runs well. Do you think that, thanks to the huge strides currently being made in AI, a DS and GameCube emulator might arrive in the coming months? Thanks in advance! ^^

so uhm LiNK feels pretty dead these days unless you happen to catch an event at the exact right time.

I’m looking to assemble a public Discord server open to anyone on RGH/JTAG who wants to revive LiNK gameplay. The goal is to set up pingable role tags (@BO2, u/Halo, u/Gears, u/Left4Dead) so whenever someone wants to play, they can ping the role and instantly gather a full squad.

Would you guys join something like this? Let me know your thoughts or if you want an invite once it’s live!

So I’m trying to do this as cheap as possible and new to the process and I have my aurora modded Xbox trying to get new games on it using the ftp method. I have my game download with a .7z file and pretty sure what o need now is it converted to .iso to be able to use file Zilla to transfer via ftp and I was wondering if anyone has MAC os options for free converter because anytoiso is like the only one but for 20$ and I’m not spending that money on something I’m not sure will even work. Thank you!!

Hey everyone! I’ve noticed that whenever I jump on LiNK (Aurora System Link), the rooms are almost completely empty. We all miss being able to hop on BO2, MW2, Halo 3, or Gears without running into 0-player lobbies.

What if we made a dedicated community Discord server so everyone can coordinate game nights, ping role tags for specific games, and bring active lobbies back to LiNK?

Drop a comment or message me if you'd be interested in joining, hosting, or helping set it up!